Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Side cutter
- RS 제품 번호:
- 665-6224
- Distrelec 제품 번호:
- 180-40-827
- 제조사 부품 번호:
- 74 06 250 RS
- 제조업체:
- Knipex
Subtotal (1 unit)*
₩146,120.00
재고있음
- 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩146,120.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 665-6224
- Distrelec 제품 번호:
- 180-40-827
- 제조사 부품 번호:
- 74 06 250 RS
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Jaw Width | 11mm | |
| Overall Length | 250mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | Yes | |
| Height Safe | No | |
| Application | Electronic | |
| ESD Safe | No | |
| Jaw Material | Chrome Vanadium Electric Steel | |
| Grip Material | Plastic | |
| Handle Material | Bi-Metal | |
| Maximum Cutting Capacity | 4.6mm | |
| Standards/Approvals | DIN ISO 9654 | |
| Cut Type | With Bevel | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Jaw Width 11mm | ||
Overall Length 250mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved Yes | ||
Height Safe No | ||
Application Electronic | ||
ESD Safe No | ||
Jaw Material Chrome Vanadium Electric Steel | ||
Grip Material Plastic | ||
Handle Material Bi-Metal | ||
Maximum Cutting Capacity 4.6mm | ||
Standards/Approvals DIN ISO 9654 | ||
Cut Type With Bevel | ||
비준수
- COO (Country of Origin):
- DE
KNIPEX 74 06 250 High Leverage Diagonal Cutter insulated with multi-component grips, VDE-tested chrome-plated 250 mm
74 06 250 High Leverage Diagonal Cutter For very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges also induction-hardened (hardness approx. 64 HRC), for all wire types including piano wire. the 250-mm-long diagonal cutter is suitable for copper conductors up to 16 mm² and aluminium conductors up to 35 mm². - Cutting capacities medium hard wire (diameter): Ø 4.6mm- Cutting capacities hard wire (diameter): Ø 3.5mm- Cutting capacities piano wire (diameter): Ø 3.0mm- VDE tested: yes
Technical attributes
For Very Tough, Continuous Use
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
관련된 링크들
- Knipex Knipex VDE/1000V Approved 4.2 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3.8 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3.1 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4 mm Small Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Cable Cutter
