Knipex Knipex VDE/1000V Approved 4 mm With Bevel Side cutter
- RS 제품 번호:
- 297-1982
- 제조사 부품 번호:
- 70 07 180
- 제조업체:
- Knipex
Subtotal (1 unit)*
₩106,480.00
재고있음
- 11 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩106,480.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 297-1982
- 제조사 부품 번호:
- 70 07 180
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal | |
| Non-Sparking | No | |
| Jaw Width | 11mm | |
| Overall Length | 180mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | Yes | |
| Height Safe | No | |
| Application | Electronic | |
| ESD Safe | No | |
| Jaw Material | Vanadium Electric Steel | |
| Handle Material | Dipped Insulation | |
| Grip Material | Plastic | |
| Standards/Approvals | DIN EN 60900, DIN ISO 5749, IEC 60900 | |
| Maximum Cutting Capacity | 4mm | |
| Cut Type | With Bevel | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal | ||
Non-Sparking No | ||
Jaw Width 11mm | ||
Overall Length 180mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved Yes | ||
Height Safe No | ||
Application Electronic | ||
ESD Safe No | ||
Jaw Material Vanadium Electric Steel | ||
Handle Material Dipped Insulation | ||
Grip Material Plastic | ||
Standards/Approvals DIN EN 60900, DIN ISO 5749, IEC 60900 | ||
Maximum Cutting Capacity 4mm | ||
Cut Type With Bevel | ||
제외
- COO (Country of Origin):
- DE
KNIPEX 70 07 180 Diagonal Cutter with dipped insulation, VDE-tested chrome-plated 180 mm
70 07 180 Diagonal Cutter narrow head style for use in confined areas. The indispensable diagonal cutter for all-round use. High-quality material and precise workmanship for long service life. Precision cutting edges for soft and hard wire. Clean cutting of thin copper wires, also at the cutting edge tips. Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC. with bevel. - Cutting capacities soft wire (diameter): Ø 4.0mm- Cutting capacities medium hard wire (diameter): Ø 3.0mm- Cutting capacities hard wire (diameter): Ø 2.5mm- VDE tested: yes
Features and Benefits
Narrow Head Style For Use In Confined Areas
Technical attributes
The Indispensable Diagonal Cutter For All-Round Use
High-Quality Material And Precise Workmanship For Long Service Life
Precision Cutting Edges For Soft And Hard Wire
Clean Cutting Of Thin Copper Wires, Also At The Cutting Edge Tips
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 61 Hrc
High-Quality Material And Precise Workmanship For Long Service Life
Precision Cutting Edges For Soft And Hard Wire
Clean Cutting Of Thin Copper Wires, Also At The Cutting Edge Tips
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 61 Hrc
Standards
EN 60900, DIN ISO 5749, VDE
관련된 링크들
- Knipex Knipex VDE/1000V Approved 4 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4 mm Small Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3.8 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4.6 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 4.2 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3.1 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 70 mm Without Bevel Cable Cutter
