제조사부품번호

Weller Erem Semi-Flush ESD Safe Cable Cutter

RS 제품 번호:: 270-8510
Distrelec 제품 번호:: 180-51-419
제조사 부품 번호:: T622N
제조업체:: Weller Erem

Weller Erem Semi-Flush ESD Safe Cable Cutter

Subtotal (1 unit)*

₩131,142.00

33 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩131,142.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 270-8510
Distrelec 제품 번호:: 180-51-419
제조사 부품 번호:: T622N
제조업체:: Weller Erem

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Weller Erem
	Product Type	Cable Cutter
	Sub Type	Side Cutter
	Jaw Width	9mm
	Overall Length	110mm
	Jaw Length	17mm
	VDE/1000V Approved	No
	Application	Microelectronic
	ESD Safe	Yes
	Jaw Material	High Grade Tool Steel
	Maximum Cutting Capacity	1.3mm
	Standards/Approvals	RoHS
	Cut Type	Semi-Flush

	모두 선택
	브랜드 Weller Erem
	Product Type Cable Cutter
	Sub Type Side Cutter
	Jaw Width 9mm
	Overall Length 110mm
	Jaw Length 17mm
	VDE/1000V Approved No
	Application Microelectronic
	ESD Safe Yes
	Jaw Material High Grade Tool Steel
	Maximum Cutting Capacity 1.3mm
	Standards/Approvals RoHS
	Cut Type Semi-Flush

Datasheet-T622N

COO (Country of Origin):: CH

Weller Cable Cutter, 1.3mm Maximum Cutting Capacity, 110mm Overall Length - T622N

This cable cutter is a precision side cutter designed for microelectronic work and delicate wiring tasks. It is intended for users in automation, electronics, electrical and mechanical sectors who require accurate trimming and shearing of small conductors while protecting sensitive assemblies during handling.

Features and Benefits:

• Semi-flush cutting style for near-surface conductor trimming
• Maximum cutting capacity 1.3mm for fine wire work
• Jaw material MADE from high-grade tool steel for edge retention
• Jaw width 9mm enabling controlled access in tight spaces
• Jaw length 17mm for precise tip engagement
• Overall length 110mm for Compact workshop and bench use

Applications

• Suitable for trimming component leads on sensitive assemblies
• Ideal for cutting small multipair cables in control panels
• Used for wire preparation in automation equipment assembly
• Can be used for delicate cable work in prototype builds
• Used with ESD-protected workstations for sensitive electronics

Is this tool appropriate for electrostatic-sensitive environments?

Yes, it is ESD-safe, making it suitable for use at ESD-protected benches and handling sensitive components.

What approvals and environmental restrictions apply to its manufacture?

The tool complies with RoHS requirements restricting certain hazardous substances.

Can it cut thicker harnesses or large-gauge wire?

Its maximum cutting capacity is 1.3 mm, so it is intended for fine conductors rather than heavy-gauge cable.

Is the tool insulated for high-voltage electrical work?

It is not approved for 1000V DC applications and should not be used as the primary insulating tool for live circuits.

What characteristics support repeated precision use?

The jaws are MADE from high-grade tool steel, supporting Durable cutting edges and consistent performance in routine microelectronic tasks.