Knipex Knipex 1.3 mm With Bevel Side cutter
- RS 제품 번호:
- 267-7109
- Distrelec 제품 번호:
- 302-23-026
- 제조사 부품 번호:
- 75 12 125
- 제조업체:
- Knipex
Subtotal (1 unit)*
₩116,080.00
재고있음
- 8 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩116,080.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 267-7109
- Distrelec 제품 번호:
- 302-23-026
- 제조사 부품 번호:
- 75 12 125
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Cutter | |
| Non-Sparking | No | |
| Jaw Width | 10.5mm | |
| Overall Length | 125mm | |
| Jaw Length | 14mm | |
| Application | Fine Mechanics, Electronic | |
| Height Safe | No | |
| ESD Safe | No | |
| Jaw Material | High Grade Special Tool Steel | |
| Handle Material | Plastic | |
| Grip Material | Plastic | |
| Standards/Approvals | DIN ISO 9654 | |
| Maximum Cutting Capacity | 1.3mm | |
| Cut Type | With Bevel | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Product Type Side cutter | ||
Sub Type Cutter | ||
Non-Sparking No | ||
Jaw Width 10.5mm | ||
Overall Length 125mm | ||
Jaw Length 14mm | ||
Application Fine Mechanics, Electronic | ||
Height Safe No | ||
ESD Safe No | ||
Jaw Material High Grade Special Tool Steel | ||
Handle Material Plastic | ||
Grip Material Plastic | ||
Standards/Approvals DIN ISO 9654 | ||
Maximum Cutting Capacity 1.3mm | ||
Cut Type With Bevel | ||
비준수
- COO (Country of Origin):
- DE
KNIPEX 75 12 125 Electronics Diagonal Cutter with plastic handles burnished 125 mm
75 12 125 Electronics Diagonal Cutter For ultra fine cutting work, e.g. in electronics and fine mechanics. With sharp, ground cutting edges for soft and hard wire and piano wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Low-friction double spring for smooth and even opening. with bevel and lead catcher, no uncontrolled loss of cut wire ends. - Cutting capacities medium hard wire (diameter): Ø 1.0mm- Cutting capacities hard wire (diameter): Ø 0.6mm- Cutting capacities piano wire (diameter): Ø 0.4mm- Cutting capacities soft wire (diameter): Ø 0.2 – 1.3mm- Jaw length (B): 14mm- Jaw thickness (joint) (D): 6.5mm- Head width (A): 10.5mm
Technical attributes
For Ultra Fine Cutting Work, E.G. In Electronics And Fine Mechanics
With Sharp, Ground Cutting Edges For Soft And Hard Wire And Piano Wire
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Low-Friction Double Spring For Smooth And Even Opening
With Sharp, Ground Cutting Edges For Soft And Hard Wire And Piano Wire
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Low-Friction Double Spring For Smooth And Even Opening
관련된 링크들
- Knipex Knipex 1.3 mm With Bevel Side cutter
- Knipex Knipex 3 mm With Bevel Side cutter
- Knipex Knipex 800 μm With Bevel Side cutter
- Knipex Knipex 1.7 mm With Bevel Side cutter
- Knipex Knipex 3.4 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.7 mm With Bevel Side cutter
- Knipex Knipex 1.5 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm With Bevel Side cutter