Subtotal (1 unit)*
₩331,120.00
재고있음
- 5 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩331,120.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 238-6966
- 제조사 부품 번호:
- 71 82 950
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Product Type | Cutter | |
| Sub Type | Mesh Cutting | |
| Non-Sparking | No | |
| Overall Length | 950mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Concrete Mesh Cutter | |
| ESD Safe | No | |
| Jaw Material | Chrome Vanadium Steel | |
| Handle Material | Powder Coated Steel Tube | |
| Grip Material | Multi Component Grip | |
| Material Cut | Hard Wire, Medium Wire, Soft Wire | |
| Maximum Cutting Capacity | 11mm | |
| Standards/Approvals | DIN EN 60900, IEC 60900, DIN ISO 5746 | |
| Cut Type | With Bevel | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Product Type Cutter | ||
Sub Type Mesh Cutting | ||
Non-Sparking No | ||
Overall Length 950mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Concrete Mesh Cutter | ||
ESD Safe No | ||
Jaw Material Chrome Vanadium Steel | ||
Handle Material Powder Coated Steel Tube | ||
Grip Material Multi Component Grip | ||
Material Cut Hard Wire, Medium Wire, Soft Wire | ||
Maximum Cutting Capacity 11mm | ||
Standards/Approvals DIN EN 60900, IEC 60900, DIN ISO 5746 | ||
Cut Type With Bevel | ||
제외
- COO (Country of Origin):
- DE
KNIPEX 71 82 950 Concrete Mesh Cutter with multi-component handles 950 mm
71 82 950 Concrete Mesh Cutter Cutting capacity up to 48 HRC hardness. Robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. Forged-in stopper with comfortable shock-absorber. Good access due to very flat construction of head and joint area. Sturdy non-slip two-colour multi-component handle sleeves. Precise adjustment (12 positions) by eccentric bolt. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Bolted cutter head, replaceable. - HRC 19: Ø 11mm- HRC 40: Ø 9mm- HRC 48: Ø 6mm- Cutting edge length mm: 44mm- Head thickness: 40mm
Technical attributes
Cutting Capacity Up To 48 Hrc Hardness
Robust Cutting Edges Are Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Forged-In Stopper With Comfortable Shock-Absorber
Good Access Due To Very Flat Construction Of Head And Joint Area
Sturdy Non-Slip Two-Colour Multi-Component Handle Sleeves
Robust Cutting Edges Are Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Forged-In Stopper With Comfortable Shock-Absorber
Good Access Due To Very Flat Construction Of Head And Joint Area
Sturdy Non-Slip Two-Colour Multi-Component Handle Sleeves
관련된 링크들
- Knipex Knipex 3 mm With Bevel Side cutter
- Knipex Super Knips® 1.6 mm With Bevel Side cutter
- Knipex Knipex With Bevel Side cutter
- Knipex Knipex 2 mm With Bevel Side cutter
- Knipex Knipex 4 mm With Bevel Side cutter
- Knipex Knipex 1 mm With Bevel Side cutter
- Knipex Knipex 4 mm With Bevel Cable Cutter
- Knipex Knipex 1.6 mm Small Bevel Side cutter
