현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
대체품
이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.
개당
₩63,680.00
- RS 제품 번호:
- 158-5619
- 제조사 부품 번호:
- 74 01 160 SB
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Jaw Width | 11mm | |
| Overall Length | 160mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Electronic | |
| Jaw Material | Chrome Vanadium Electric Steel | |
| ESD Safe | No | |
| Handle Material | Bi-Metal | |
| Grip Material | Plastic | |
| Standards/Approvals | DIN ISO 9654 | |
| Maximum Cutting Capacity | 3.1mm | |
| Cut Type | With Bevel | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Jaw Width 11mm | ||
Overall Length 160mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Electronic | ||
Jaw Material Chrome Vanadium Electric Steel | ||
ESD Safe No | ||
Handle Material Bi-Metal | ||
Grip Material Plastic | ||
Standards/Approvals DIN ISO 9654 | ||
Maximum Cutting Capacity 3.1mm | ||
Cut Type With Bevel | ||
비준수
- COO (Country of Origin):
- DE
KNIPEX 74 01 160 SB High Leverage Diagonal Cutter with plastic coating black atramentized 160 mm
74 01 160 SB High Leverage Diagonal Cutter For very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges also induction-hardened (hardness approx. 64 HRC), for all wire types including piano wire. - Cutting capacities medium hard wire (diameter): Ø 3.4mm- Cutting capacities hard wire (diameter): Ø 2.5mm- Cutting capacities piano wire (diameter): Ø 2.0mm
Technical attributes
For Very Tough, Continuous Use
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
High Cutting Performance With Minimum Effort Due To Optimum Coordination Of The Cutting Edge Angle And Transmission Ratio
Precision Cutting Edges Also Induction-Hardened (Hardness Approx. 64 Hrc), For All Wire Types Including Piano Wire
Standards
Standards: DIN ISO 5749
관련된 링크들
- Knipex Knipex 3.1 mm With Bevel Side cutter
- Knipex Knipex With Bevel Side cutter
- Knipex Knipex 4 mm With Bevel Side cutter
- Knipex Knipex 3.4 mm With Bevel Side cutter
- Knipex Knipex 4.2 mm With Bevel Side cutter
- Knipex Knipex 4.6 mm With Bevel Side cutter
- Knipex Knipex VDE/1000V Approved 3.1 mm With Bevel Side cutter
- Knipex Knipex 3.8 mm With Bevel Side cutter

