Penta MS60 VDE/1000V Approved Diagonal ESD Safe Diagonal Cutter
- RS 제품 번호:
- 621-607
- 제조사 부품 번호:
- MS60RS-165
- 제조업체:
- Penta
Subtotal (1 unit)*
₩75,218.80
재고있음
- 추가로 2026년 1월 26일 부터 18 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩75,218.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 621-607
- 제조사 부품 번호:
- MS60RS-165
- 제조업체:
- Penta
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Penta | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Overall Length | 165mm | |
| VDE/1000V Approved | Yes | |
| Application | Electronic | |
| Jaw Material | Steel | |
| ESD Safe | Yes | |
| Grip Material | Polyvinyl Chloride | |
| Standards/Approvals | ESI 26-3, EN 60900, IEC 900 | |
| Maximum Cutting Capacity | 1.6mm | |
| Cut Type | Diagonal | |
| 모두 선택 | ||
|---|---|---|
브랜드 Penta | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Overall Length 165mm | ||
VDE/1000V Approved Yes | ||
Application Electronic | ||
Jaw Material Steel | ||
ESD Safe Yes | ||
Grip Material Polyvinyl Chloride | ||
Standards/Approvals ESI 26-3, EN 60900, IEC 900 | ||
Maximum Cutting Capacity 1.6mm | ||
Cut Type Diagonal | ||
제외
- COO (Country of Origin):
- FR
Insulated Cutters
Insulated, tested and marked in accordance with the requirements of the UK Electricity Supply Industry. The insulation Excellent mechanical and electrical properties (over temperature range -20°C to +70°C) and are tested to a minimum of 10000 V, 50 Hz for 3 mins at various stages of manufacture. To ensure visual safety should the insulation become damaged, the final coat is ’orange’ and preceding coats are ’white’.
Impact resistant, fire retardant and resistant to most acids
Guaranteed up to 1000V
Diagonal Cutters: Suitable for hard and soft wire
Cable Cutters: Rockwell hardness and safety lock. Cutting Capacity 55mm²
End cutter: Suitable for piano wire (Cutting Capacity 2mm)
White Unbreakable PVC (Primary Coating); Dipped Orange PVC (Final Coating); Nylon Insulation (Reinforced Ends)
Standards
IEC900, EN 60900, ESI 26/3