Knipex 64 62 ESD ESD Safe Oblique Cutters
- RS 제품 번호:
- 288-897
- 제조사 부품 번호:
- 64 62 120 ESD
- 제조업체:
- Knipex
Subtotal (1 unit)*
₩124,813.20
재고있음
- 3 개 단위 배송 준비 완료
- 추가로 2026년 1월 13일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩124,813.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 288-897
- 제조사 부품 번호:
- 64 62 120 ESD
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Model Number | 64 62 ESD | |
| Cutter Type | Oblique Cutters | |
| Non Sparking | No | |
| Overall Length | 120 mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| ESD Safe | Yes | |
| Material | Chrome-Plated Steel with Ball Bearings | |
| Maximum Cutting Capacity | 0.6mm | |
| Cutting Capacity Soft Wire | 0.6mm | |
| Cutting Capacity Copper Wire | 0.6mm | |
| Cut Type | Small Bevel | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Model Number 64 62 ESD | ||
Cutter Type Oblique Cutters | ||
Non Sparking No | ||
Overall Length 120 mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
ESD Safe Yes | ||
Material Chrome-Plated Steel with Ball Bearings | ||
Maximum Cutting Capacity 0.6mm | ||
Cutting Capacity Soft Wire 0.6mm | ||
Cutting Capacity Copper Wire 0.6mm | ||
Cut Type Small Bevel | ||
비준수
- COO (Country of Origin):
- DE
Electronic front cutter small bevel 120mm
Features / Benefits :
65° angle
ESD - Static Dissipative Handles
Precision interlocking hinge
Low-friction double spring for smooth, even opening of the clamp
Mirror polishing, combined with a thin layer of oil, provides good protection against rust, thus avoiding disturbances in the electrical circuit caused by flaking chrome particles
Induction hardened cutting edges, hardness at least 56 HRC
sheathing and two-tone black/grey
ESD - Static Dissipative Handles
Precision interlocking hinge
Low-friction double spring for smooth, even opening of the clamp
Mirror polishing, combined with a thin layer of oil, provides good protection against rust, thus avoiding disturbances in the electrical circuit caused by flaking chrome particles
Induction hardened cutting edges, hardness at least 56 HRC
sheathing and two-tone black/grey
Special quality tool steel, forged, oil-hardened.