Weller Erem Flush ESD Safe Cable Cutter
- RS 제품 번호:
- 178-910
- 제조사 부품 번호:
- 2477E
- 제조업체:
- Weller Erem
Subtotal (1 unit)*
₩170,340.00
재고있음
- 1 개 단위 배송 준비 완료
- 추가로 2026년 8월 20일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩170,340.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 178-910
- 제조사 부품 번호:
- 2477E
- 제조업체:
- Weller Erem
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Weller Erem | |
| Product Type | Cable Cutter | |
| Sub Type | Diagonal Cutter | |
| Jaw Width | 11mm | |
| Overall Length | 127mm | |
| Jaw Length | 19mm | |
| VDE/1000V Approved | No | |
| Application | Microelectronic | |
| ESD Safe | Yes | |
| Jaw Material | Special Steel | |
| Handle Material | Ergonomic | |
| Maximum Cutting Capacity | 1.3mm | |
| Standards/Approvals | RoHS | |
| Cut Type | Flush | |
| 모두 선택 | ||
|---|---|---|
브랜드 Weller Erem | ||
Product Type Cable Cutter | ||
Sub Type Diagonal Cutter | ||
Jaw Width 11mm | ||
Overall Length 127mm | ||
Jaw Length 19mm | ||
VDE/1000V Approved No | ||
Application Microelectronic | ||
ESD Safe Yes | ||
Jaw Material Special Steel | ||
Handle Material Ergonomic | ||
Maximum Cutting Capacity 1.3mm | ||
Standards/Approvals RoHS | ||
Cut Type Flush | ||
제외
- COO (Country of Origin):
- CH
Weller Cable Cutter, 127mm Overall Length, 1.3mm Maximum Cutting Capacity - 2477E
This cable cutter is a Compact diagonal tool designed for precision work in electronics and microelectronic environments. It provides flush cutting performance for small-diameter conductors and is intended for tasks that require careful, controlled wire and component trimming. The cutter is configured to support electrostatic‑sensitive workflows.
Features and Benefits:
• Flush cutting action for neat, low‑profile wire ends
• Maximum cutting capacity 1.3mm for small conductors
• ESD‑safe construction to protect sensitive assemblies
• Special steel jaws for sustained cutting‑edge retention
• Ergonomic handle to reduce hand fatigue during repetitive use
• Maximum cutting capacity 1.3mm for small conductors
• ESD‑safe construction to protect sensitive assemblies
• Special steel jaws for sustained cutting‑edge retention
• Ergonomic handle to reduce hand fatigue during repetitive use
Applications
• Suitable for trimming component leads on populated boards
• Ideal for cable preparation in control panel wiring
• Used for precise cuts in automation harness assembly
• Can be used for maintenance tasks in electrical workshops
• Ideal for cable preparation in control panel wiring
• Used for precise cuts in automation harness assembly
• Can be used for maintenance tasks in electrical workshops
What is the tool’s approved safety rating regarding high‑voltage VDC use?
It is not approved for 1000V DC applications and should not be used as insulated high‑voltage protection.
What are the jaw characteristics that affect grip and precision?
The jaws are MADE from a specialised steel and finished to enable controlled diagonal flush cuts without excessive deformation.
How does the tool suit Compact workspaces encountered in industry?
Its overall length of 127mm offers a short reach for access into tight assemblies while maintaining leverage for cutting small conductors.
Is the product compliant with environmental restriction standards?
The tool conforms to RoHS requirements restricting certain hazardous substances within its materials.
관련된 링크들
- Weller Erem Flush ESD Safe Cable Cutter
- Weller Erem Semi-Flush ESD Safe Cable Cutter
- Erem 2477 ESD Flush ESD Safe Side Cutter
- Weller Erem Flush ESD Safe Tip Cutter
- Weller Erem Flush ESD Safe Side cutter
- Weller Erem Flush ESD Safe Cable Cutter Distance Cutter
- Weller Erem ESD Safe Flush Distance Cutter
- Weller Erem 575E ESD Flush ESD Safe Tip Cutter