Microchip PAC1952T-2E/4MX, Current Monitor 16-Pin, VQFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Current Sensor ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 pack of 5 units)*

₩10,866.40

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 1월 30일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
5 - 45₩2,173.28₩10,866.40
50 - 95₩2,131.92₩10,659.60
100 - 245₩2,094.32₩10,471.60
250 - 995₩2,056.72₩10,283.60
1000 +₩2,022.88₩10,114.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
234-3753
제조사 부품 번호:
PAC1952T-2E/4MX
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

Current Monitor

Offset Voltage

100 μV

Quiescent Current

5μA

Package Type

VQFN

Pin Count

16

Mount Type

Surface

Minimum Supply Voltage

2.7V

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Standards/Approvals

No

Series

PAC1952

Length

3mm

Width

3 mm

Automotive Standard

No

The Microchip Technology PAC1952T-1E/J6CX is a four-channel, 16 pin energy monitor with bus voltage monitor and current sense amplifier that feed high-resolution ADCs. It has a digital circuitry that performs power calculations and energy accumulation. This enables energy monitoring with integration periods up to one year or longer. The bus voltage, sense resistor voltage and accumulated proportional power are stored in registers for retrieval by the system host or embedded controller. This device has a set of digital comparators that allow the user to detect over/under voltage, over/undercurrent and overpower against user programmed limits for each channel and generates an ALERT when the threshold is exceeded. It is used in applications such as embedded computing, networking, Low voltage/high-power - AI, GPU, Linux® applications, notebook and tablet computing, cloud, Linux & server computing and optical networking modules.

100 mV full-scale range (FSR) for current sense voltage

16-bit resolution for voltage and current measurement

External sense resistor sets the full-scale current range

Very low input current simplifies routing

Voltage monitor with Wide VBUS Range

0V to 32V FSR

16V programmable VBUS option

VSOURCE can be applied before VDD is applied

1% power measurement accuracy over a wide dynamic range

On-chip accumulation of 30-bit power results for energy measurement

5120 SPS for a single channel in burst mode

2.7V to 5.5V supply operation

High-speed mode (3.4 Mbps)

Two independent ALERT/GPIO pins

Uses real-time calibration to minimize the offset error

No input filters are required for this device

관련된 링크들