Kubler K 07.20 Counter, Counter, 7 Digit, 10 Hz 115V ac
- RS 제품 번호:
- 296-4518
- 제조사 부품 번호:
- 1.130.200.054
- 제조업체:
- Kubler
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩68,714.00
재고있음
- 추가로 2026년 3월 16일 부터 63 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩68,714.00 |
| 5 - 9 | ₩65,988.00 |
| 10 + | ₩63,224.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 296-4518
- 제조사 부품 번호:
- 1.130.200.054
- 제조업체:
- Kubler
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Kubler | |
| Product Type | Counter | |
| Function | Counter | |
| Connection Type | Solder Pin | |
| Reset Method | No Reset | |
| Number of Digits | 7 | |
| Direction of Rotation | Up | |
| Mount Type | Panel Mount | |
| Maximum Supply Voltage | 115V ac | |
| Count Direction | Up | |
| Minimum Operating Temperature | -10°C | |
| Digit Height | 4mm | |
| Maximum Operating Temperature | 60°C | |
| Depth | 32.7mm | |
| Standards/Approvals | No | |
| Maximum Count Frequency | 10Hz | |
| Weight | 18g | |
| Cutout Height | 13mm | |
| Cutout Width | 30mm | |
| Meter Type | Electromechanical | |
| Series | K 07.20 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Kubler | ||
Product Type Counter | ||
Function Counter | ||
Connection Type Solder Pin | ||
Reset Method No Reset | ||
Number of Digits 7 | ||
Direction of Rotation Up | ||
Mount Type Panel Mount | ||
Maximum Supply Voltage 115V ac | ||
Count Direction Up | ||
Minimum Operating Temperature -10°C | ||
Digit Height 4mm | ||
Maximum Operating Temperature 60°C | ||
Depth 32.7mm | ||
Standards/Approvals No | ||
Maximum Count Frequency 10Hz | ||
Weight 18g | ||
Cutout Height 13mm | ||
Cutout Width 30mm | ||
Meter Type Electromechanical | ||
Series K 07.20 | ||
- COO (Country of Origin):
- DE
Non Reset Totalising Counters
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
관련된 링크들
- Kubler AK07.00 Counter, Counter, 7 Digit, 10 Hz 115V ac
- Kubler SK 07.1 Counter, Counter, 7 Digit Analogue, 10 Hz 115V ac
- Kubler K05.20 Counter, Counter, 5 Digit Digital, 10 Hz 115V dc
- Kubler K 07.20 Counter, Counter, 7 Digit, 25 Hz 230V
- Kubler W15.21 Counter, Counter, 5 Digit Analogue, 10 Hz 115V ac
- Kubler W16.20 Counter, Counter, 6 Digit Analogue, 10 Hz 115V ac
- Kubler W15.51 Counter, Counter, 5 Digit Analogue, 10 Hz 115V ac
- Kubler W17.50 Counter, Counter, 7 Digit Analogue, 10 Hz 115V ac
