Hengstler SIGNO 721 Counter, Counter, 5 Digit LCD, 60 kHz 30V dc
- RS 제품 번호:
- 546-795
- Distrelec 제품 번호:
- 303-25-986
- 제조사 부품 번호:
- 0 721 201
- 제조업체:
- Hengstler
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩414,339.90
재고있음
- 추가로 2026년 5월 25일 부터 5 개 단위 배송
- 추가로 2026년 8월 03일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩414,339.90 |
| 5 - 9 | ₩399,835.80 |
| 10 + | ₩385,105.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 546-795
- Distrelec 제품 번호:
- 303-25-986
- 제조사 부품 번호:
- 0 721 201
- 제조업체:
- Hengstler
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Hengstler | |
| Product Type | Counter | |
| Count Mode | Impulse | |
| Display Type | LCD | |
| Function | Counter | |
| Connection Type | Screw, Plug | |
| Reset Method | Automatic & Manual | |
| Number of Digits | 5 | |
| Mount Type | DIN Rail | |
| Maximum Supply Voltage | 30V dc | |
| Minimum Operating Temperature | 0°C | |
| Digit Height | 12mm | |
| Backlighting | Yes | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | No | |
| Depth | 110mm | |
| Weight | 200g | |
| Maximum Count Frequency | 60kHz | |
| Cutout Height | 45mm | |
| Cutout Width | 45mm | |
| Series | SIGNO 721 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Hengstler | ||
Product Type Counter | ||
Count Mode Impulse | ||
Display Type LCD | ||
Function Counter | ||
Connection Type Screw, Plug | ||
Reset Method Automatic & Manual | ||
Number of Digits 5 | ||
Mount Type DIN Rail | ||
Maximum Supply Voltage 30V dc | ||
Minimum Operating Temperature 0°C | ||
Digit Height 12mm | ||
Backlighting Yes | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals No | ||
Depth 110mm | ||
Weight 200g | ||
Maximum Count Frequency 60kHz | ||
Cutout Height 45mm | ||
Cutout Width 45mm | ||
Series SIGNO 721 | ||
- COO (Country of Origin):
- DE
Preset Counter - Signo 721.2
Single or dual preset counter
IP65 rated
Counting Operating modes -one channel add or subtract; Direction mode; differential mode (add/sub); totalizing mode (add/add); phase discriminator
Programmable reset back to 0 or back to preset 2 (externally resettable)
Overwriting of counter reading is possible
Keylock can be absolute or separately set to allow correction and/or prescaler
Please Note: The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted to 30 kHz
Hengstler Panel Mounting 48 x 48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.
Note
Please Note: The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted to 30 kHz
Approvals
UL, CSA
관련된 링크들
- Hengstler SIGNO 721 Counter, Counter, 5 Digit LCD, 60 kHz 30V dc
- Hengstler TICO 731 Counter, Counter, 8 Digit LCD, 7.5 kHz 24V dc
- Hengstler TICO 772 Counter, Counter, 6 Digit LCD, 60 kHz 30V dc
- Hengstler TICO 772 Counter, Counter, 6 Digit LCD, 60 kHz 230V ac
- Hengstler TICO 772 Counter, Counter, 6 Digit LCD, 60 kHz 115V ac
- Hengstler TICO 772 Counter, Counter, 6 Digit LCD, 60 kHz 24V ac
- Hengstler TICO 731 Counter, Counter, 8 Digit LCD, 7.5 kHz 24V
- Hengstler TICO 773 Timer, Counter, 6 Digit LCD, 60 kHz 30V dc