제조사부품번호

Eaton Push Button Control Station, 2 Cutouts, IP65, IP67

RS 제품 번호:: 321-161
제조사 부품 번호:: GHG4118201R1308
제조업체:: Eaton

Eaton Push Button Control Station, 2 Cutouts, IP65, IP67

Subtotal (1 unit)*

₩465,882.80

재고있음

추가로 2025년 12월 26일 부터 40 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩465,882.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 321-161
제조사 부품 번호:: GHG4118201R1308
제조업체:: Eaton

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Eaton
	Series	CROUSE-HINDS
	Number of Cutouts	2
	Enclosure Colour	Black
	IP Rating	IP65, IP67
	Cutout Diameter	22mm
	Length	125mm
	Width	85mm
	Hazardous Area Certification	ATEX
	Depth	77.5mm
	Minimum Operating Temperature	-20°C
	Maximum DC Voltage	110V
	Maximum Current	16A
	Maximum Operating Temperature	+40°C
	Maximum AC Voltage	500V

	모두 선택
	브랜드 Eaton
	Series CROUSE-HINDS
	Number of Cutouts 2
	Enclosure Colour Black
	IP Rating IP65, IP67
	Cutout Diameter 22mm
	Length 125mm
	Width 85mm
	Hazardous Area Certification ATEX
	Depth 77.5mm
	Minimum Operating Temperature -20°C
	Maximum DC Voltage 110V
	Maximum Current 16A
	Maximum Operating Temperature +40°C
	Maximum AC Voltage 500V

COO (Country of Origin):: DE

Dual Pushbutton

Start and Stop pushbuttons
Depth: 90mm

Certificate No.

PTB 00 ATEX 3117

Group and Category

II 2 G EEx e d IIC T6

Eaton CEAG Start Stop Control Station - Crouse-Hinds Series - GHG4118201R1308

Looking for a control station to provide reliable circuit protection? This CEAG push-button unit from Eaton's Crouse-Hinds series effectively manages power and offers durability. Hard-wearing thermoplastic housing provides excellent insulation and makes the controller highly resistant to impact and chemicals. Its IP67 (ingress protection) rating also ensures it's completely dust-tight and water-resistant, while explosion protection means the unit is safe for use in hazardous commercial and industrial environments.
The stop and start push buttons snap in and out quickly for easy wiring. This product is ideal for off-shore applications and circuit-control tasks in demanding mechanical and chemical conditions.

• Low side walls for optimal cable connection
• M20 bottom cable entry with cable gland for ease of installation
• Notches in the mounting rails to stop built-in components from twisting out of place

What is an explosion-protected product?

Explosion protection indicates that the control station is Zone 1 and 2 ATEX (atmosphere explosible) certified. This means it's universally approved for use in areas where explosive gases are likely to be present during normal operation.

Where can I mount this control station?

This unit is suitable for wall mounting. It's supplied with fixing holes that are easily accessible without the need to break the seal on the enclosure cover.

Note

Eaton formerly known as CEAG
Push buttons 202-3881 or 202-3897 or pilot light 202-3932 can be used.

CEAG Hazardous Area

Suitable for use in Zone 1 hazardous areas
Impact resistant thermoplastic
Ingress protection to IP67 (unless stated otherwise)

Rated voltage: contact blocks; 500V, signal lamps; 240V
Rated current: contact blocks; 16A
M20 bottom cable entry complete with cable-gland