Lapp OLFLEX CLASSIC FD 810 Control Cable, 12 Cores 19, Unscreened, Silver Grey Polyvinyl Chloride Sheath

Subtotal (1 reel of 50 metres)*

₩803,460.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
릴당
릴당
미터당*
1 +₩803,460.00₩16,070.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
288-6625
Distrelec 제품 번호:
300-49-340
제조사 부품 번호:
26124
제조업체:
Lapp
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Lapp

Series

OLFLEX CLASSIC FD 810

Product Type

Control Cable

Number of Cores

12

Conductor Material

Bare Copper

Jacket Material

Polyvinyl Chloride

Jacket Colour

Silver Grey

Screened/Unscreened

Unscreened

Conductor Type

Stranded

Standards/Approvals

CE marked, EAC Certified, UKCA marked

Maximum Operating Temperature

80°C

American Wire Gauge

19

COO (Country of Origin):
FR

LAPP OLFLEX CLASSIC FD 810 Series Control Cable, 12 Cores, Silver Grey Jacket - 26124


This control cable is intended for signal and control circuits in industrial environments where flexible conductors and a protective outer sheath are required. It combines a multi-core stranded conductor arrangement with a PVC outer covering, allowing use where moderate temperature endurance is needed. Markings indicate conformity with regional certification regimes appropriate for industrial installations.

Features and Benefits:


• 12-core configuration enables multiple circuit runs in a single cable
• Stranded bare copper conductors improve conductor flexibility
• PVC jacket provides mechanical protection and chemical resistance
• Rated to 80°C maximum for elevated-temperature operation
• Available in silver grey for discreet machinery routing

Applications


• Suitable for wiring control cabinets and relay panels
• Ideal for movable machine parts requiring flexing
• Used with automation equipment for multiple signal lines
• Can be used for interconnection of sensors and actuators

What conductor construction is used and why is it important?


The conductors are stranded bare copper which increases flexibility and maintains good electrical continuity for repeated movement.

Which environmental limit should installers observe during use?


Installation and operation should not exceed the specified maximum operating temperature of 80°C to avoid thermal degradation.

What does the outer sheath material indicate about handling?


The outer sheath is MADE from polyvinyl chloride providing a balance of abrasion resistance and ease of routing through cable trays and conduits.

What certification marks are present to assist specification?


The product carries CE, EAC and UKCA markings indicating conformity with relevant regional standards for installed electrical products.

관련된 링크들