Lapp Olflex Chain 809 Control Cable, 5 Cores, 0.75mm² 19 AWG, Unscreened, Grey Polyvinyl Chloride Sheath

RS 제품 번호:: 433-350
제조사 부품 번호:: 1026711
제조업체:: Lapp

Lapp Olflex Chain 809 Control Cable, 5 Cores, 0.75mm² 19 AWG, Unscreened, Grey Polyvinyl Chloride Sheath

Subtotal (1 reel of 100 metres)*

₩722,740.00

1 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

릴당	릴당	미터당*
1 +	₩722,740.00	₩7,228.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 433-350
제조사 부품 번호:: 1026711
제조업체:: Lapp

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Lapp
	Series	Olflex Chain 809
	Product Type	Control Cable
	Number of Cores	5
	Conductor Material	Bare Copper
	Jacket Material	Polyvinyl Chloride
	Jacket Colour	Grey
	Screened/Unscreened	Unscreened
	Outside Diameter	7.10mm
	Voltage	500V ac
	Minimum Operating Temperature	-40°C
	Conductor Type	Stranded
	Maximum Operating Temperature	80°C
	Standards/Approvals	UL 758 AWM Style 20886, EN 50575, EN 50525 2 51, EN 13501 6, CSA C22.2 No. 210
	Hazardous Area Certification	No
	Cable CSA	0.75mm²
	American Wire Gauge	19AWG
	Fire Behaviour	UL VW-1 acc. to UL 1581 1080, UL Cable Flame Test acc. to UL 1581 1061, Flame Retardant acc. to IEC 60332-1-2 resp. EN 60332-1-2, CSA FT1 acc. to CSA C22.2 No. 2556 §9.3

	모두 선택
	브랜드 Lapp
	Series Olflex Chain 809
	Product Type Control Cable
	Number of Cores 5
	Conductor Material Bare Copper
	Jacket Material Polyvinyl Chloride
	Jacket Colour Grey
	Screened/Unscreened Unscreened
	Outside Diameter 7.10mm
	Voltage 500V ac
	Minimum Operating Temperature -40°C
	Conductor Type Stranded
	Maximum Operating Temperature 80°C
	Standards/Approvals UL 758 AWM Style 20886, EN 50575, EN 50525 2 51, EN 13501 6, CSA C22.2 No. 210
	Hazardous Area Certification No
	Cable CSA 0.75mm²
	American Wire Gauge 19AWG
	Fire Behaviour UL VW-1 acc. to UL 1581 1080, UL Cable Flame Test acc. to UL 1581 1061, Flame Retardant acc. to IEC 60332-1-2 resp. EN 60332-1-2, CSA FT1 acc. to CSA C22.2 No. 2556 §9.3

Datasheet - 1026711

COO (Country of Origin):: FR

LAPP Olflex Chain 809 Series Control Cable, 500V Voltage, 7.10mm Outside Diameter - 1026711

This control cable is intended for industrial signal and control circuits where flexibility and a Compact profile are needed. It features stranded bare copper conductors insulated with PVC and a grey PVC outer sheath, allowing use across a wide temperature span in installations requiring flame-retardant behaviour. The construction supports repeated motion in cable chains and festoons while meeting multiple international wiring standards.

Features and Benefits:

• 5 cores provide multi-signal routing in a single run
• 19 AWG conductor size offers balanced conductivity and flexibility
• PVC insulation and jacket deliver consistent electrical separation
• Flame-retardant construction meets UL VW-1 and IEC 60332-1-2
• Rated for -40°C to 80°C for varied ambient conditions

Applications

• Suitable for cable chains and festoon systems
• Used with industrial control panels and machinery
• Ideal for multi-conductor signal distribution runs
• Can be used in wiring harnesses for factory automation
• Suitable for installations requiring grey-sheathed cabling

What conductor composition does it use?

The cable uses stranded bare copper conductors to combine flexibility with electrical conductivity.

Which standards approvals are recorded for this cable?

The cable carries approvals including UL 758 AWM Style 20886, EN 50575, EN 50525-2-51, EN 13501-6, and CSA C22.2 No. 210.

How does the sheath perform in fire conditions?

The outer material is PVC tested to the UL cable flame test and CSA FT1 and complies with flame-retardant requirements in IEC 60332-1-2.

What is the electrical voltage rating?

It is specified for operation at 500V AC for control and signalling circuits.

How many and what size conductors are included?

The cable comprises five stranded conductors at 19 AWG each.