RS PRO Stainless Steel Compression Spring, 20 mm x 4.63 mm OD, 1.67 N/mm

모든 Compression Springs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 pack of 10 units)*

₩14,588.80

Add to Basket
수량 선택 또는 입력
재고있음
  • 4,160 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 - 40₩1,458.88₩14,588.80
50 +₩1,201.32₩12,013.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
821-368
Distrelec 제품 번호:
304-17-847
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Outside Diameter

4.63 mm

Product Type

Compression Spring

Wire Diameter

0.63mm

Free Length

20mm

Minimum Working Length

11.3mm

Load at Minimum Working Length

14.3N

Material

Stainless Steel

Spring Rate

1.67N/mm

End Type

Square and Unground

Standards/Approvals

No

COO (Country of Origin):
GB

RS PRO Stainless Steel Compression Springs


RS PRO range of compression springs manufactured from stainless steel which come in various sizes and lengths and with a closed not ground end type. Compression springs are very popular as they can store a large amount of energy in a small space making them ideal for a great range of uses.

These RS PRO compression springs also referred to as coil springs have varying degrees of stiffness which is also known as spring rate.

Coiled springs are designed so they can push back to the springs original height when they are compressed. These springs are used to keep components from meeting.

RS PRO have a great range of compression springs with wire diameters from 0.2 mm to 2.2 mm and spring rates from 0.06 N/mm to 22.56 N/mm.

Features and Benefits:


Coil spring design for strength and elasticity

Stainless steel material - good corrosion and rust resistance

Material to DIN 17224 No.1, 4310 or BS2056 EN58A

Ends are squared and unground

Appearance: brown/bronze

Made with a right hand helix

Spring can be directly put on the rod products or put into the tube products

Typical Applications:


Compression springs are a very popular spring and can be used in a number of different industries. This type of spring can be used in

Ball point pens

Vehicles

Mobile phones

Valves

Electrical switches

Why RS PRO?

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.

Note

The load at minimum working length is the load required to compress the spring to that length. All dimensions and forces to conform to DIN 2095 (grade 2).

관련된 링크들