LMC7211AIM5/NOPB Texas Instruments, Comparator, Push-Pull O/P, 4μs 5-Pin SOT-23

모든 Comparators 열람하기
대량 구매 할인 기용 가능

Subtotal (1 pack of 5 units)*

₩14,288.00

Add to Basket
수량 선택 또는 입력
마지막 RS 재고
  • 최종적인 465 개 unit(s)이 배송 준비 됨
수량
한팩당
한팩당*
5 - 245₩2,857.60₩14,284.24
250 - 495₩2,786.16₩13,927.04
500 +₩2,742.92₩13,712.72

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
761-6166
제조사 부품 번호:
LMC7211AIM5/NOPB
제조업체:
Texas Instruments
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Texas Instruments

Comparator Type

Low Power

Mounting Type

Surface Mount

Package Type

SOT-23

Power Supply Type

Dual

Output Type

Push-Pull

Number of Channels per Chip

1

Typical Response Time

4µs

Pin Count

5

Dimensions

2.92 x 1.6 x 1.02mm

Length

2.92mm

Width

1.6mm

Height

1.02mm

Typical CMRR

75dB

Typical Dual Supply Voltage

±15V

Typical PSRR

80dB

Minimum Operating Temperature

-40 °C

Maximum Operating Temperature

+85 °C

Typical Voltage Gain

100 dB

LMC series CMOS Comparators


For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.



Comparators, Texas Instruments


Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

관련된 링크들