LM361N/NOPB Texas Instruments, Dual Comparator, TTL O/P, 0.02μs 14-Pin PDIP
- RS 제품 번호:
- 761-5873
- 제조사 부품 번호:
- LM361N/NOPB
- 제조업체:
- Texas Instruments
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
- RS 제품 번호:
- 761-5873
- 제조사 부품 번호:
- LM361N/NOPB
- 제조업체:
- Texas Instruments
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Texas Instruments | |
| Comparator Type | High Speed | |
| Mounting Type | Through Hole | |
| Package Type | PDIP | |
| Power Supply Type | Dual | |
| Output Type | TTL | |
| Number of Channels per Chip | 2 | |
| Typical Response Time | 0.02µs | |
| Pin Count | 14 | |
| Dimensions | 19.56 x 6.35 x 3.429mm | |
| Length | 19.56mm | |
| Width | 6.35mm | |
| Height | 3.43mm | |
| Typical Voltage Gain | 3 V/mV | |
| Minimum Operating Temperature | 0 °C | |
| Typical Dual Supply Voltage | ±15V | |
| Maximum Operating Temperature | +70 °C | |
| 모두 선택 | ||
|---|---|---|
브랜드 Texas Instruments | ||
Comparator Type High Speed | ||
Mounting Type Through Hole | ||
Package Type PDIP | ||
Power Supply Type Dual | ||
Output Type TTL | ||
Number of Channels per Chip 2 | ||
Typical Response Time 0.02µs | ||
Pin Count 14 | ||
Dimensions 19.56 x 6.35 x 3.429mm | ||
Length 19.56mm | ||
Width 6.35mm | ||
Height 3.43mm | ||
Typical Voltage Gain 3 V/mV | ||
Minimum Operating Temperature 0 °C | ||
Typical Dual Supply Voltage ±15V | ||
Maximum Operating Temperature +70 °C | ||
Differential Input/Output Comparators
A range of voltage comparators from Texas Instruments having both differential inputs and differential outputs.
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
관련된 링크들
- LM361N/NOPB Texas Instruments, Dual Comparator, TTL O/P, 0.02μs 14-Pin PDIP
- LM311N/NOPB Texas Instruments, Comparator, DTL, RTL, TTL O/P, 200ns 36 V 8-Pin PDIP
- LM2903MX/NOPB Texas Instruments, Dual Comparator, CMOS/TTL O/P, O/P, 2 → 36 V 8-Pin SOIC
- LM2903N/NOPB Texas Instruments, Dual Comparator, Open Collector, Open Drain O/P, 1.3μs 8-Pin PDIP
- LM393P Texas Instruments, Dual Comparator, CMOS/TTL/OC O/P, O/P, 1.3μs 2 → 36 V 8-Pin PDIP
- LM393PE4 Texas Instruments, Dual Comparator, CMOS/TTL O/P, O/P, 1.3μs 2 → 30 V 8-Pin PDIP
- LM339N Texas Instruments, Comparator, CMOS/TTL O/P, O/P, 0.3μs 2 → 30 V 14-Pin PDIP
- LM393N/NOPB Texas Instruments, Comparator, Single Ended O/P, 1.3μs 2 → 36 V 8-Pin PDIP