TS864IPT STMicroelectronics, Quad Comparator, Push-Pull O/P, 500ns 2.7 → 10 V 14-Pin TSSOP
- RS 제품 번호:
- 189-2122
- 제조사 부품 번호:
- TS864IPT
- 제조업체:
- STMicroelectronics
대량 구매 할인 기용 가능
Subtotal (1 pack of 25 units)*
₩39,245.00
일시적 품절
- 2026년 4월 13일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 25 - 25 | ₩1,569.80 | ₩39,235.60 |
| 50 - 75 | ₩1,530.32 | ₩38,258.00 |
| 100 - 225 | ₩1,492.72 | ₩37,299.20 |
| 250 - 975 | ₩1,453.24 | ₩36,340.40 |
| 1000 + | ₩1,419.40 | ₩35,494.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 189-2122
- 제조사 부품 번호:
- TS864IPT
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Comparator Type | Micropower | |
| Mounting Type | Surface Mount | |
| Package Type | TSSOP | |
| Power Supply Type | Single | |
| Output Type | Push-Pull | |
| Number of Channels per Chip | 4 | |
| Typical Response Time | 500ns | |
| Pin Count | 14 | |
| Typical Single Supply Voltage | 2.7 → 10 V | |
| Dimensions | 5.1 x 4.5 x 1.05mm | |
| Length | 5.1mm | |
| Width | 4.5mm | |
| Height | 1.05mm | |
| Typical CMRR | 75dB | |
| Typical Voltage Gain | 240 dB | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Temperature | -40 °C | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Comparator Type Micropower | ||
Mounting Type Surface Mount | ||
Package Type TSSOP | ||
Power Supply Type Single | ||
Output Type Push-Pull | ||
Number of Channels per Chip 4 | ||
Typical Response Time 500ns | ||
Pin Count 14 | ||
Typical Single Supply Voltage 2.7 → 10 V | ||
Dimensions 5.1 x 4.5 x 1.05mm | ||
Length 5.1mm | ||
Width 4.5mm | ||
Height 1.05mm | ||
Typical CMRR 75dB | ||
Typical Voltage Gain 240 dB | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Temperature -40 °C | ||
The TS86x device (single, dual and quad) is a rail-to-rail comparator characterized for 2.7 to 10 V operation over -40 °C to +85 °C temperature ranges. It exhibits an excellent speed-to-power ratio, featuring a current consumption of 6 μA per comparator and a response time of 500 ns at 2.7 V for a 100 mV overdrive. Due to its ultra low power consumption and its availability in a tiny package, the TS86x comparator family is perfectly suited to battery-powered systems. The output stage is designed with a push-pull structure allowing a direct connection to the microcontroller without additional pull-up resistors.
Ultra low current consumption (6 μA/comp. at VCC = 2.7 V)
Rail-to-rail CMOS inputs
Push-pull outputs
Supply operation from 2.7 to 10 V
Low propagation delay
ESD protection (2 kV)
Latch-up immunity (class A)
Available in SOT23-5 micro package, SO-8, SO-14,TSSOP8, and TSSOP14 package
Rail-to-rail CMOS inputs
Push-pull outputs
Supply operation from 2.7 to 10 V
Low propagation delay
ESD protection (2 kV)
Latch-up immunity (class A)
Available in SOT23-5 micro package, SO-8, SO-14,TSSOP8, and TSSOP14 package
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
관련된 링크들
- TS864IPT STMicroelectronics, Quad Comparator, Push-Pull O/P, 500ns 2.7 → 10 V 14-Pin TSSOP
- TS3704IPT STMicroelectronics, Quad Comparator, Push-Pull O/P, 2μs 3 → 15 V 14-Pin TSSOP
- TS334IPT STMicroelectronics, Quad Comparator, Open Drain O/P, 1.6 → 5 V 14-Pin TSSOP
- MCP6574T-E/ST Microchip, Quad Comparator, Push-Pull Output O/P, 40ns 1.8 V 14-Pin TSSOP
- MCP6544-E/ST Microchip, Quad Comparator, Push-Pull O/P, 1.8 → 5.5 V 14-Pin TSSOP
- MCP6544-E/SL Microchip, Quad Comparator, Push-Pull O/P, 4000ns 5.5 V 14-Pin SOIC
- TS3011ILT STMicroelectronics, Comparator, Push-Pull O/P, 8ns 2.2 → 5 V 5-Pin SOT-23
- TS3011ICT STMicroelectronics, Comparator, Push-Pull O/P, 8ns 2.2 → 5 V 5-Pin SC-70