Texas Instruments 1-Channel Comparator Open Collector O/P, 0.2 μs 36 V 9 V 8-Pin SOIC

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Comparators 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tube of 95 units)*

₩83,406.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 1,710 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tube*
95 - 95₩877.96₩83,351.68
190 - 285₩859.16₩81,548.76
380 +₩838.48₩79,727.04

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
121-8868
제조사 부품 번호:
LM311M/NOPB
제조업체:
Texas Instruments
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Texas Instruments

Comparator Type

General Purpose

Product Type

Comparator

Mount Type

Surface

Package Type

SOIC

Output Type

Open Collector

Number of Channels

1

Typical Response Time

0.2μs

Pin Count

8

Maximum Supply Voltage

36V

Minimum Supply Voltage

9V

Minimum Operating Temperature

0°C

Maximum Operating Temperature

70°C

Standards/Approvals

No

Length

4.9mm

Height

1.45mm

Width

3.9 mm

Supply Current

7.5mA

Automotive Standard

No

COO (Country of Origin):
GB

LMx11 family Single Comparators


The LM111, LM211 and LM311 from Texas Instruments are differential input voltage comparators with a wide operating voltage range and 200 ns response time. The inputs of these devices can be isolated from system ground and the uncommitted outputs can drive loads referred to either supply rail or ground. These single comparators are provided with balancing and strobe capability.

Comparators, Texas Instruments


Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for Rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of Faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

관련된 링크들