Texas Instruments OP Amp + Comparator CMOS/TTL O/P, 1.3 μs 32 V 3 V 8-Pin MDIP
- RS 제품 번호:
- 121-8745
- 제조사 부품 번호:
- LM392N/NOPB
- 제조업체:
- Texas Instruments
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 tube of 40 units)*
₩63,017.60
재고있음
- 1,000 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Tube* |
|---|---|---|
| 40 - 40 | ₩1,575.44 | ₩63,055.20 |
| 80 - 120 | ₩1,541.60 | ₩61,686.56 |
| 160 + | ₩1,507.76 | ₩60,310.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 121-8745
- 제조사 부품 번호:
- LM392N/NOPB
- 제조업체:
- Texas Instruments
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Texas Instruments | |
| Product Type | OP Amp + Comparator | |
| Comparator Type | Low Power | |
| Mount Type | Through Hole | |
| Package Type | MDIP | |
| Output Type | CMOS/TTL | |
| Typical Response Time | 1.3μs | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 32V | |
| Minimum Supply Voltage | 3V | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 3.3mm | |
| Width | 6.35 mm | |
| Length | 9.27mm | |
| Standards/Approvals | No | |
| Supply Current | 2mA | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Texas Instruments | ||
Product Type OP Amp + Comparator | ||
Comparator Type Low Power | ||
Mount Type Through Hole | ||
Package Type MDIP | ||
Output Type CMOS/TTL | ||
Typical Response Time 1.3μs | ||
Pin Count 8 | ||
Maximum Supply Voltage 32V | ||
Minimum Supply Voltage 3V | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 3.3mm | ||
Width 6.35 mm | ||
Length 9.27mm | ||
Standards/Approvals No | ||
Supply Current 2mA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- GB
Combined Comparator & Operational Amplifier
Integrated solutions from Texas Instruments combining a general purpose operational amplifier and voltage comparator in a single package.
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for Rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of Faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
관련된 링크들
- LM392N/NOPB Texas Instruments, OP Amp + Comparator, 8-Pin MDIP
- LM392M/NOPB Texas Instruments, Comparator, 8-Pin SOIC
- LM6134BIN/NOPB Texas Instruments, Precision, Op Amp, RRIO, 10MHz, 3 → 18 V, 14-Pin MDIP
- LMC6041IN/NOPB Texas Instruments, Precision, Op Amp, 75kHz, 5 → 15 V, 8-Pin MDIP
- LMC6042IN/NOPB Texas Instruments, Precision, Op Amp, 100kHz, 5 → 15 V, 8-Pin MDIP
- LM10CLN/NOPB Texas Instruments, OP Amp + Voltage Reference, 8-Pin 40 V PDIP
- LM319N/NOPB Texas Instruments, Dual Comparator, Open Collector O/P, 0.08μs 9 → 28 V 14-Pin MDIP
- LM339N/NOPB Texas Instruments, Quad Comparator, Open Collector O/P, 1.3μs 3 → 28 V 14-Pin MDIP
