LM339N/NOPB Texas Instruments, Quad Comparator, Open Collector O/P, 1.3μs 3 to 28 V 14-Pin MDIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Comparators 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tube of 25 units)*

₩34,263.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 200 개 단위 배송 준비 완료
  • 추가로 2026년 1월 01일 부터 50 개 단위 배송
  • 추가로 2026년 1월 15일 부터 500 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tube*
25 - 25₩1,370.52₩34,253.60
50 - 75₩1,342.32₩33,558.00
100 +₩1,316.00₩32,900.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
121-8704
제조사 부품 번호:
LM339N/NOPB
제조업체:
Texas Instruments
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Texas Instruments

Comparator Type

General Purpose

Mounting Type

Through Hole

Package Type

MDIP

Power Supply Type

Dual, Single

Output Type

Open Collector

Number of Channels per Chip

4

Typical Response Time

1.3µs

Pin Count

14

Typical Single Supply Voltage

3 to 28 V

Dimensions

19.05 x 6.35 x 3.3mm

Length

19.05mm

Width

6.35mm

Height

3.3mm

Minimum Operating Temperature

0 °C

Maximum Operating Temperature

+70 °C

Typical Voltage Gain

106.02 dB

Typical Dual Supply Voltage

±12 V, ±15 V, ±3 V, ±5 V, ±9 V

COO (Country of Origin):
GB

LMx39/LM2901 family Quad Comparators


The Texas Instruments LM139, LM239, LM339 and LM2901 are quad differential input voltage comparators designed to operate from a single power supply over a wide range of voltages. The common mode input voltage range includes ground and the devices have open collector outputs.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.



Comparators, Texas Instruments


Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

관련된 링크들