제조사부품번호

NeoCortec NeoMesh NC1000C-8 NC100-8 Wireless Mesh Evaluation Kit for Advanced Metering Infrastructure, Mobile Ad-Hoc

RS 제품 번호:: 195-8823
제조사 부품 번호:: EVALNC1000C-8
제조업체:: NeoCortec

Subtotal (1 unit)*

₩672,927.20

재고있음

3 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩672,927.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 195-8823
제조사 부품 번호:: EVALNC1000C-8
제조업체:: NeoCortec

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	NeoCortec
	Product Type	Communication & Wireless Development Tool
	RF Technology	Wireless Mesh
	Kit Classification	Evaluation Kit
	Technology	NeoMesh Protocol
	For Use With	Advanced Metering Infrastructure, Mobile Ad-Hoc Networks, Wireless Sensor Networks, Home Control and Building Automation, Alarm and Security Systems, Industrial Automation, Automatic Meter Reading, Agricultural and Forest Monitoring
	Featured Device	NC100-8
	Kit Name	NeoMesh NC1000C-8
	Maximum Frequency	915MHz
	Interface Type	UART
	Standards/Approvals	FCC part 15.247, EN 62368-1:2014, EN 301 489-3 V2.1.1, IC, ETSI, EN 300 220-2 V3.1.1, FCC, EN 301 489-1 V2.2.0, EN 62479:2010

	모두 선택
	브랜드 NeoCortec
	Product Type Communication & Wireless Development Tool
	RF Technology Wireless Mesh
	Kit Classification Evaluation Kit
	Technology NeoMesh Protocol
	For Use With Advanced Metering Infrastructure, Mobile Ad-Hoc Networks, Wireless Sensor Networks, Home Control and Building Automation, Alarm and Security Systems, Industrial Automation, Automatic Meter Reading, Agricultural and Forest Monitoring
	Featured Device NC100-8
	Kit Name NeoMesh NC1000C-8
	Maximum Frequency 915MHz
	Interface Type UART
	Standards/Approvals FCC part 15.247, EN 62368-1:2014, EN 301 489-3 V2.1.1, IC, ETSI, EN 300 220-2 V3.1.1, FCC, EN 301 489-1 V2.2.0, EN 62479:2010

To get you started evaluating the NeoCortec Wireless Mesh Networking Protocol, we have designed an evaluation kit, which will take you through a few easy steps to start sending payload data from one PC to another through the NeoCortec network.

Once the basic steps have been completed, you can start building your own application: We have designed the evaluation board such that you can easily interface to your favourite host controller:

USB link to a PC with 2 virtual COM ports. An Application Port to be used for sending and receiving payload data. A System Port to be used for setting the configuration parameters as well as uploading new software releases should they become available.

Pin headers allow for easy integration to MCU eval boards or other development boards such as Arduino and similar. In addition to this, the evaluation boards are equipped with Temperature & Humidity sensor, Potentiometer to generate a analog input signal to the build-in A/D converter. Finally there is a series of LEDs which can easily be connected to the GPIOs of the modules to test the digital outputs. The evaluation kit comes with a USB stick, which includes PC tools for sending and receiving payload data through the wireless mesh network, and for configuring and updating the software inside the module. The evaluation kit contains 5 pcs of evaluation boards with the NCxxxx modules installed.

NeoCortec NeoMesh NC1000C-8 NC100-8 Wireless Mesh Evaluation Kit for Advanced Metering Infrastructure, Mobile Ad-Hoc

관련된 링크들