제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	MikroElektronika
	RF Technology	LoRa
	Kit Classification	Module
	Product Type	Communication & Wireless Development Tool
	Kit Name	Opto 2 Click
	Maximum Frequency	8GHz
	Interface Type	GPIO
	Standards/Approvals	IEEE 802.11

	모두 선택
	브랜드 MikroElektronika
	RF Technology LoRa
	Kit Classification Module
	Product Type Communication & Wireless Development Tool
	Kit Name Opto 2 Click
	Maximum Frequency 8GHz
	Interface Type GPIO
	Standards/Approvals IEEE 802.11

Brochure - MIKROE

Opto 2 click is a galvanic isolator Click board™, used to provide an optical isolation of sensitive microcontroller (MCU) pins, when operated by external signals. TLP2770 opto-isolation elements (optocouplers) can be driven with a very low current, down to 1.3mA (min). A choice of high-speed optocouplers allows Opto 2 click to be used on communication lines, with up to 20 Mbps data rates. This Click board™ can be used to provide an optical isolation when there is a requirement for a high reinforced isolation between the external signal lines and the controller logic with a MCU such as in PLCs or similar applications

Programmable Logic Controllers (PLCs)

Battery Management System (BMS)

Industrial Inverters

Package: SO6L

Data transfer rate: 20 MBd (typ.) (NRZ)

Supply current: 0.4 mA (max)

Threshold input current: 1 mA (max)

Supply voltage: 2.7 to 5.5 V

Operating temperature: -40 to 125 

Propagation delay time: tpHL/tpLH = 60 ns (max)

Pulse width distortion: |tpHL-tpLH| = 25 ns (max)

Isolation voltage: 5000 Vrms (min)

MikroElektronika Opto 2 Click LoRa Module 8 GHz MIKROE-3015

관련된 링크들