제조사부품번호

Belden 70084NH Series, 1000 m, RG11 Coaxial SDI Coaxial Cable 75 Ω, Green, Unterminated

RS 제품 번호:: 644-610
제조사 부품 번호:: 70084NH.001000
제조업체:: Belden

Belden 70084NH Series, 1000 m, RG11 Coaxial SDI Coaxial Cable 75 Ω, Green, Unterminated

Subtotal (1 reel of 1000 metres)*

₩8,865,207.00

제조사가 재고 비축중

2026년 8월 24일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

릴당	릴당	미터당*
1 +	₩8,865,207.00	₩8,864.70

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 644-610
제조사 부품 번호:: 70084NH.001000
제조업체:: Belden

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Belden
	Terminated/Unterminated	Unterminated
	Product Type	SDI Coaxial Cable
	Coaxial Type	RG11
	American Wire Gauge	14AWG
	Outside Diameter	10.2mm
	Characteristic Impedance	75Ω
	Conductor Type	Solid
	Minimum Operating Temperature	30°C
	Attenuation	0.5 to 37.8 dB/100m
	Maximum Operating Temperature	70°C
	Cable Length	1000m
	Jacket Colour	Green
	Standards/Approvals	UKCA, IEC 62821-1, IEC 61034-2, IEC 60754-1/-2, IEC 60332-3-24, IEC 60332-1-2, EU CE, EN 50117-1, CEI 20-22-3
	Fire Behaviour	IEC 60332-1-2
	Conductor Material	Bare Copper
	Series	70084NH
	Jacket Material	Low Smoke Zero Halogen

	모두 선택
	브랜드 Belden
	Terminated/Unterminated Unterminated
	Product Type SDI Coaxial Cable
	Coaxial Type RG11
	American Wire Gauge 14AWG
	Outside Diameter 10.2mm
	Characteristic Impedance 75Ω
	Conductor Type Solid
	Minimum Operating Temperature 30°C
	Attenuation 0.5 to 37.8 dB/100m
	Maximum Operating Temperature 70°C
	Cable Length 1000m
	Jacket Colour Green
	Standards/Approvals UKCA, IEC 62821-1, IEC 61034-2, IEC 60754-1/-2, IEC 60332-3-24, IEC 60332-1-2, EU CE, EN 50117-1, CEI 20-22-3
	Fire Behaviour IEC 60332-1-2
	Conductor Material Bare Copper
	Series 70084NH
	Jacket Material Low Smoke Zero Halogen

Datasheet - 70084NH.001000

COO (Country of Origin):: NL

Belden 70084NH Series Coaxial Cable, 75Ω Characteristic Impedance, 1000m Length - 70084NH.001000

This Coaxial cable delivers 75Ω signal transmission for professional low-loss Coax installations. It is a solid-conductor RG11 cable on a 1000 m roll designed for use in demanding electrical and electronic systems where low attenuation and consistent impedance are required. The construction and sheath materials make it suitable for installations that need reduced smoke and corrosive gas emissions in the event of fire.

Features and Benefits:

• 14 AWG solid copper conductor provides consistent conductivity and signal integrity
• Low attenuation range 0.5–37.8 dB/100 m supports long-distance links
• LSZH jacket reduces toxic gases and smoke during combustion
• Rated to operate between -30°C and 70°C for varied site conditions
• 75Ω characteristic impedance ensures compatibility with RF equipment
• 10.2mm outside diameter gives predictable handling and routing

Applications

• Suitable for CCTV and satellite signal distribution in commercial buildings
• Ideal for long-run RF feeds between headends and distribution points
• Used for automation sensor links requiring stable impedance
• Can be used for electrical testbeds needing solid-conductor Coax

Is the cable supplied ready-terminated for direct connector fitment?

It is provided unterminated so technicians can fit connectors suited to the installation and test for cable-to-connector impedance match.

What fire-performance standards does it meet for building installations?

The sheath meets IEC 60332-1-2 flame propagation tests and related LSZH criteria limiting smoke and acid gas emissions.

How does the conductor type affect signal behaviour in long runs?

The solid bare copper conductor minimises impedance variation and supports stable high-frequency transmission over extended distances.

Which approvals indicate suitability for UK and European projects?

It carries UKCA and CE markings along with multiple IEC and EN test references confirming regulatory conformity.