Seeit SUPERPRO-610P Universal Programmer, Universal Programmer for EPROM, PLDs, ARM9 32 bit MCU, FLASH

모든 Chip Programmers 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩2,789,656.80

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 3월 05일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩2,789,656.80
5 +₩2,510,683.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
798-4393
제조사 부품 번호:
SUPERPRO-610P
제조업체:
Seeit
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Seeit

Product Type

Universal Programmer

Sub Type

Universal Programmer

For Use With

EPROM, PLDs, ARM9 32 bit MCU, FLASH

Kit Contents

In-Circuit Debugger/Programmer, Cable

Programmer Name

SUPERPRO-610P

Interface Type

USB 2.0

Standards/Approvals

No

COO (Country of Origin):
CN

SUPERPRO 610P, High-Speed Universal Programmer, USB 2.0


The SuperPro-610P is an universal production programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be download freely.

Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller

Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, and more

Tests and Detects incorrect insertion of the device and defective pin

protected against short circuits and over-voltages

Computer interface with USB 2.0

AC Power Adapter: AC input 90V to 250V, 50/60Hz, DC output 12V/2A; power: 15W

Dimensions: 178 x 130 x 40 mm, Weight: 0.8kg

Kit Contents


Programmer with 48-pins ZIF socket

Power Adaptor 90-260Vac to 12Vdc

USB-B to USB-A cable

Software on CD-ROM

User manual in English and French

PC Based Programmers


관련된 링크들