Seeit VERYPRO-390, Universal Programmer for Logic Devices, Memory Devices, Microcontrollers, PLD

모든 Chip Programmers 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩988,718.32

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2025년 12월 29일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩988,718.32
5 +₩889,847.24

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
772-3090
제조사 부품 번호:
VERYPRO-598
제조업체:
Seeit
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Seeit

Accessory Type

Universal Programmer

For Use With

Logic Devices, Memory Devices, Microcontrollers, PLD

Interface

USB 2.0

Programmer Name

VERYPRO-390

Memory Type Programmed

EEPROM, EPROM, FLASH

COO (Country of Origin):
CN

VERYPRO-390, Universal Programmer for 21000 devices, with ZIF48 Socket, USB 2.0


VeryPro-598 is an universal programmer which supports over 22.000 different components among EPROMS with 24/28/32/40 pins (2716 to 27C4096-27C800), parallel EEPROMS (2804 to 28C040), serial EEPROMS (17xx / 24xx / 25xx / SST25Fxx / 29xx / 35xx / 58xx / 59xx / 60xx / 64xx / 85xx / 93xx / 95xx / Pioneer / Bosch), FLASHs memories until 48 pins (28Fxxx / 29Fxxx / 29F160 / 29F800 / 37xxx / 39xxx / 49xxx), populars microcontrollers (77Cxx / 87Cxx / 87C52x / 89Cxx / 97Cxx / AT90Sxxxx / ATmegaxx / ATtinyxx / PIC12Cxx / PIC16Cxx / PIC12Fxx / PIC16Fxxx), and PLDs (ATF16Vxx / ATF20Vxx / ATF22Vxx /GAL16Vxx / GAL20Vxx / GAL22Vxx / PALCE16Vxx /PALCE20Vxx / PALCE22Vxx / PEEL22CV10). autodetection of inserted EPROMs. It has an IC test software to identify logic components (C-mos4000 / 74xxx / LM324 / LM339 / ULN20xx / ULN28xx) and it can test Static RAM / Dynamic DRAM. Accepts low-voltage components until 1,8V and has an autotection for poors pins contacts. It does not need any adapter for all components in SDIP package. With severals components it can work without wall transformers, on USB port only. The software works with Windows XP/VISTA/Windows7/Windows8/Windows10 (32bits and 64 bits).

Accepts standard file formats: JEDEC, INTEL (Extended) HEX, HOLTEK, EMC(.CDS), INTEL HEX16, Motorola S record, BINARY, Tektronix (linear & segmented), and auto find format. Manages 16 and 32 bit word split (Set Programming). Features Test Vector capability and multiarray fuse map editor. Optimum programming for each individual device. Automaticly identifies the manufacturer and type of E(E)PROMs, auto identifies TTL/CMOS logic IC. Device insertion test and poor pin contact check. Modify algorithm parameters. Support down to 1,8V low voltage devices. Set addresses intelligently, such as device start address, device end address, from buffer address and so on. Not need exterior adapter for mostly devices. Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters, (support from 6 pin to 300 pin device packages). Auto-run mode starts programming automatically upon detection of chip insertion. Auto system test. Mass production mode. Supports Windows XP / VISTA / Windows 7 / Windows8 / Windows 10 (32bits and 64bits) with 100MB of spare capacity.

Hardware & Electrical specifications


Dimensions product: 168 x 98 x 23mm. Weight: 256g.
Dimensions package: 230 x 180 x 65mm. Weight : 620g
Power supply : adapter with AC input 100V to 240V, 50Hz/60Hz, output 9Vdc/0,6A.
Interface : connect to laptop or PC throught USB port (USB 2.0 high speed)
Support : ZIF48 pin-drivers, (support 8 pins to 48 pins DIP package)

Contents

Programmer with ZIF48 pins. Power supply. USB cable. Software on CD. User manual in English and French.


PC Based Programmers

관련된 링크들