RS PRO 20VA 2 Output Chassis Mounting Transformer, 12V ac, IEC 61558-2-6

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩51,230.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 80 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 9₩51,230.00
10 - 24₩49,688.40
25 - 49₩48,165.60
50 - 249₩47,131.60
250 +₩38,784.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
504-571
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Primary Voltage Rating

230V ac

Secondary Voltage Rating

12V ac

Power Rating

20VA

Number of Outputs

2

Mounting Type

Chassis

Primary Winding Resistance

120Ω

Efficiency

80%

Length

59mm

Width

57mm

Depth

50mm

Dimensions

59 x 57 x 50mm

Fixing Hole Diameter

4.7 x 8.7mm

Weight

550g

Minimum Operating Frequency

50Hz

Standards Met

IEC 61558-2-6

Maximum Operating Frequency

60Hz

Maximum Temperature

(Ambient) 70°C

Minimum Temperature

-30°C

COO (Country of Origin):
PL

Chassis Mount, Clamp Construction, 230Vac, 6V to 50V


Chassis mounting low voltage mains transformers with a single 230Va.c. 50/60Hz primary winding. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps
Solder tag terminations
Optional terminal shrouds
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742

RS PRO Chassis Mount, Clamp Construction 230 V ac, 6 VA to 50 VA Mains Transformer


It has been over 100 years since the introduction of the first commercial Transformer when the mass production began. Since then, many additional modifications were developed to support various applications, such as electromagnetic, relays, pumps or heating elements.

.

The general concept of Chassis Mounting Transformers is around the usage of magnetic induction between coils to convert current and or voltage levels without changing the frequency.

Today, we are proudly introducing our own branded RS PRO Mains Transformer, packed in a chassis mount configuration. Our chassis type Mount Transformer provides a primary voltage rating of 230 V ac and power rating of 20 VA for exceptional isolating qualities. The two separate secondary windings can be connected either in series or parallel to give a wide range of output voltage and current options.

Features and Benefits


  • The construction of our primary Mains provides double section bobbin fully shrouded

  • Our Chassis has a full varnish impregnation

  • Two hole fixing wrap-over clamps

  • The Transformer has a solder tag termination

  • 100% electrical and flash tested following BS3535 and EN 60742 regulations

  • Optional terminal shrouds (example 503-912)

  • The magnetic field that links both primary and secondary windings

  • Technical product specifications visible on permanent label

Applications


Chassis type has a variety of applications where the Mains Transformer is used, particularly in:

  • Electromagnetic applications

  • Electronic and electrical control systems

  • relays

  • Pumps

  • Speed changers

  • heating elements.


Why RS PRO?


RS PRO is our own-brand range of great-value products. Each part of every RS PRO product is stringently tested against demanding industry standards. We give it our seal of approval only when we're confident of exceptional quality. That's why RS PRO is trusted by engineers worldwide.

Standards

BS3535; EN 60 742

관련된 링크들