RS PRO 2 Output 100 VA Chassis Mount Transformer, 24 V ac, IEC/BS/EN 61558-1, AS/NZS 61558.1, RoHS, AS/NZS 61558.2.6,

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩101,313.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 81 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 9₩101,313.20
10 - 49₩97,271.20
50 +₩80,050.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
504-325
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Product Type

Chassis Mount Transformer

Primary Voltage

230 V ac

Secondary Voltage

24 V ac

Number of Outputs

2

Power

100VA

Minimum Operating Temperature

-30°C

Maximum Operating Temperature

70°C

Width

68 mm

Weight

1.6kg

Length

89mm

Minimum Operating Frequency

50Hz

Depth

75mm

Maximum Operating Frequency

60Hz

Standards/Approvals

IEC/BS/EN 61558-1, AS/NZS 61558.1, RoHS, AS/NZS 61558.2.6, IEC/BS/EN 61558-2-6, CE

COO (Country of Origin):
PL

RS PRO Chassis Mount Clamp & Frame Construction 115/230 V ac Mains Transformer


It has been over 100 years since the introduction of the first commercial Transformer when the mass production began. Since then, many additional modifications were developed to support various applications, such as electromagnetic, relays, pumps or heating elements.

.

The general concept of Chassis Mounting Transformers is around the usage of magnetic induction between coils to convert current and or voltage levels without changing the frequency.

Today, we are proudly introducing our own branded RS PRO Mains Transformer, packed in a chassis mount configuration. Our chassis type Mount Transformer provides a primary voltage rating of 115 V ac, 230 V ac and power rating of 100 VA for exceptional isolating qualities. The two separate secondary windings can be connected either in series or parallel to give a wide range of output voltage and current options.

Features and Benefits


  • The construction of our primary Mains provides double section bobbin fully shrouded

  • Our Chassis has a full varnish impregnation

  • Two-hole fixing wrap-over clamps of 6 VA to 50 VA

  • Multi-hole frame fixing of 100 VA

  • The Transformer has a solder tag termination

  • 100% electrical and flash tested following BS3535 and EN 60742 regulations

  • Our Mains provide high efficiency with low regulation design

  • The magnetic field that links both primary and secondary windings

    • Applications


    Chassis type has a variety of applications where the Mains Transformer is used, particularly in:

  • Electromagnetic applications

  • Electronic and electrical control systems

  • relays

  • Pumps

  • Speed changers

  • heating elements.


    • Why RS PRO?


    RS PRO is our own-brand range of great-value products. Each part of every RS PRO product is stringently tested against demanding industry standards. We give it our seal of approval only when we're confident of exceptional quality. That's why RS PRO is trusted by engineers worldwide.

    Open Laminated Clamp & Frame 115-230Vac Primary 6VA to 100VA


    Chassis mounting mains transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

    Note

    Suitable transformer shrouds: 6VA = 503-912 ; 12 & 20VA = 504-004 ; 50, 75 & 100VA = 503-928

    관련된 링크들