RS PRO 1 Output 500 VA Isolation Transformer, 0 - 230V ac, IEC61558-2-4

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

본 제품군 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (1 unit)*

₩443,280.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 7월 13일 부터 29 개 단위 배송
  • 추가로 2026년 9월 11일 부터 50 개 단위 배송
  • 추가로 2026년 10월 01일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
1 - 24₩443,280.00
25 - 124₩427,760.00
125 +₩352,060.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
504-228
Distrelec 제품 번호:
304-05-709
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Product Type

Isolation Transformer

Primary Voltage

+ 15 – 0 – 230 - 400V ac

Secondary Voltage

0 - 230V ac

Number of Outputs

1

Power

500VA

Minimum Operating Temperature

-30°C

Fixing Hole Diameter

6.5mm

Maximum Operating Temperature

70°C

Width

143mm

Length

120mm

Minimum Operating Frequency

50Hz

Series

ST53351

Depth

130mm

Weight

7.5kg

Maximum Operating Frequency

60Hz

Standards/Approvals

IEC61558-2-4

COO (Country of Origin):
PL

RS PRO Panel Isolation Transformer, Primary voltage 230, 245, 400, 415 V ac, Secondary voltage 230 V ac


It has been over 100 years since the introduction of the first commercial Transformer when the mass production began. Since then, many additional modifications we developed to support various applications, such as electromagnetic, relays, pumps or heating elements.

.

The functionality of the Isolation Transformer has a concept to provide galvanic isolation between the AC power lines (mains) and the connected device, meaning no a DC can cross between the windings.

Today, we are proudly introducing our own branded RS PRO Isolation Transformer with a screw connector for multiple input and brackets for screw fixation. The exceptional isolating property and safety of our Transformer provide step up or step down of line (mains) voltages while reducing the noise coming from the primary to secondary or opposite.

The Isolation Transformers supports different types of equipment, from testing power-related devices to medical isolation equipment. However, they must meet rigorous electrical requirements to make sure no leakage current is in place.

Features and Benefits


  • 100% electrical and flash tested following BS EN 61558-1 regulations

  • Our Transformer provides high-quality safety and isolating properties for use in control circuits and general applications

  • Exceptional low loss noise laminations characterising our Isolation Transformer

  • Thanks to the dual standard primary winding 230/400 V ac with +15 V tap creates input flexibility to your equipment

  • The Transformer has an earth terminal provided whereas the dual secondaries are centre tapped

  • The Isolation Transformer has reliable protection against humidity and rusting thanks to varnish impregnation

  • The Transformer is fully shrouded cage clamp terminal with the voltage markings

  • All the crucial technical information is available on the permanent label attached

  • The Isolation Transformer provides high efficiency with a low regulation design

    • Applications


    The Transformer with isolating properties has an association with the following applications:

  • Medical industry

  • Testing power devices

  • where transfer power between two circuits is mandatory

    • Why RS PRO?


    RS PRO is our own-brand range of great-value products. Each part of every RS PRO product is stringently tested against demanding industry standards. We give it our seal of approval only when we're confident of exceptional quality. That's why RS PRO is trusted by engineers worldwide.

    Laminated


    관련된 링크들