제조사부품번호

Microchip, CAN Transceiver 8 Mbps, 8-Pin SOIC

RS 제품 번호:: 177-1625
제조사 부품 번호:: MCP2542FD-H/SN
제조업체:: Microchip

Microchip, CAN Transceiver 8 Mbps, 8-Pin SOIC

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 tube of 100 units)*

₩137,992.00

재고있음

5,000 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tube*
100 - 400	₩1,379.92	₩137,973.20
500 +	₩1,351.72	₩135,209.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 177-1625
제조사 부품 번호:: MCP2542FD-H/SN
제조업체:: Microchip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Microchip
	Maximum Data Rate	8Mbps
	Product Type	CAN Transceiver
	Number of Transceivers	1
	Sub Type	CAN Transceiver
	Power Down Mode	Normal, Standby
	Supply Current	70mA
	Mount Type	Surface
	Package Type	SOIC
	Interface Type	CAN FD, CAN 2.0
	Pin Count	8
	Minimum Supply Voltage	4.5V
	Maximum Supply Voltage	5.5V
	ESD Protection	Yes
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	150°C
	Series	MCP2542FD
	Length	4.9mm
	Height	1.5mm
	Width	3.9 mm
	Standards/Approvals	RoHS
	Automotive Standard	AEC-Q100

	모두 선택
	브랜드 Microchip
	Maximum Data Rate 8Mbps
	Product Type CAN Transceiver
	Number of Transceivers 1
	Sub Type CAN Transceiver
	Power Down Mode Normal, Standby
	Supply Current 70mA
	Mount Type Surface
	Package Type SOIC
	Interface Type CAN FD, CAN 2.0
	Pin Count 8
	Minimum Supply Voltage 4.5V
	Maximum Supply Voltage 5.5V
	ESD Protection Yes
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 150°C
	Series MCP2542FD
	Length 4.9mm
	Height 1.5mm
	Width 3.9 mm
	Standards/Approvals RoHS
	Automotive Standard AEC-Q100

Datasheet

COO (Country of Origin):: US

The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current,electromagnetic compatibility (EMC) and electrostatic discharge (ESD).

Supports CAN 2.0 and CAN with Flexible Data Rate CAN FD) Physical Layer Transceiver Requirements

Optimized for CAN FD at 2, 5 and 8 Mbps Operation

Maximum propagation delay: 120 ns

Loop delay symmetry: ±10% (2 Mbps)

Wake-up on CAN activity, 3.6 μs filter time

Very Low Standby Current (4 μA, typical)

VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O

CAN Bus Pins are Disconnected when Device is Unpowered

An unpowered node or brown-out event will not load the CAN bus

Device is unpowered if VDD or VIO drop below its POR level

Detection of

Microchip, CAN Transceiver 8 Mbps, 8-Pin SOIC

관련된 링크들