Microchip, CAN Transceiver 8 Mbps, 8-Pin SOIC

모든 CAN Interface Ics 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tube of 100 units)*

₩135,548.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 2월 23일 부터 400 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tube*
100 - 400₩1,355.48₩135,548.00
500 +₩1,327.28₩132,822.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
177-1623
제조사 부품 번호:
MCP2542FD-E/SN
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

CAN Transceiver

Maximum Data Rate

8Mbps

Number of Transceivers

1

Sub Type

CAN Transceiver

Power Down Mode

Standby, Normal

Supply Current

70mA

Mount Type

Surface

Package Type

SOIC

Interface Type

ISO 11898-2, ISO 11898-5, CAN

Pin Count

8

Minimum Supply Voltage

4.5V

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

ESD Protection

Yes

Maximum Operating Temperature

125°C

Width

3.9 mm

Height

1.5mm

Series

MCP2542FD

Length

4.9mm

Standards/Approvals

No

Automotive Standard

AEC-Q100

COO (Country of Origin):
US
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, low quiescent current,electromagnetic compatibility (EMC) and electrostatic discharge (ESD).

Supports CAN 2.0 and CAN with Flexible Data Rate CAN FD) Physical Layer Transceiver Requirements

Optimized for CAN FD at 2, 5 and 8 Mbps Operation

Maximum propagation delay: 120 ns

Loop delay symmetry: ±10% (2 Mbps)

Wake-up on CAN activity, 3.6 μs filter time

Very Low Standby Current (4 μA, typical)

VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5V I/O

CAN Bus Pins are Disconnected when Device is Unpowered

An unpowered node or brown-out event will not load the CAN bus

Device is unpowered if VDD or VIO drop below its POR level

Detection of

관련된 링크들