ETA X222.611 Busbar, 24 V dc, 59.5 mm Pitch

모든 Busbars 열람하기
일시적 품절
RS 제품 번호:
723-4875
제조사 부품 번호:
X222.611.59 BUSBAR (PACK OF 10)
제조업체:
ETA
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

ETA

Product Type

Busbar

Rated Operational Voltage

24 V dc

For Use With

ESX10-T

Standards/Approvals

No

Pitch

59.5mm

Series

X222.611

Number of Modules

5

COO (Country of Origin):
DE

ESX10-T Electronic Circuit Protectors


Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit protector. It is therefore possible to switch on capacitive loads of up to 20,000μF, but they are disconnected only in the event of an overload or short circuit.

Selective load protection, electronic trip characteristics

Reliable overload disconnection with 1.1 x lN plus, even with long load lines or small cable cross sections

Manual ON/OFF button (S1)

Status and failure indication through LED, status output SF or Si contact F

Integral fail-safe element adjusted to current rating

Can be snapped onto symmetrical rails for ease of installation and space-saving in control cabinets

Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges

Approvals

UL, CSA

관련된 링크들