Vishay Bridge Rectifier, 2A, 1000V, 4-Pin
- RS 제품 번호:
- 708-2670
- 제조사 부품 번호:
- 2W10G-E4/51
- 제조업체:
- Vishay
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 Bag of 10 units)*
₩9,287.20
재고있음
- 950 개 단위 배송 준비 완료
- 추가로 2026년 1월 23일 부터 1,750 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Bag* |
|---|---|---|
| 10 - 740 | ₩928.72 | ₩9,287.20 |
| 750 - 1490 | ₩911.80 | ₩9,118.00 |
| 1500 + | ₩894.88 | ₩8,948.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 708-2670
- 제조사 부품 번호:
- 2W10G-E4/51
- 제조업체:
- Vishay
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Vishay | |
| Peak Average Forward Current | 2A | |
| Bridge Type | Single Phase | |
| Peak Reverse Repetitive Voltage | 1000V | |
| Mounting Type | Through Hole | |
| Package Type | WOG | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 60A | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -55 °C | |
| Peak Forward Voltage | 1.1V | |
| Peak Reverse Current | 5µA | |
| Length | 9.86mm | |
| Dimensions | 9.86 x 8.84 x 5.6mm | |
| Width | 8.84mm | |
| Height | 5.6mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Vishay | ||
Peak Average Forward Current 2A | ||
Bridge Type Single Phase | ||
Peak Reverse Repetitive Voltage 1000V | ||
Mounting Type Through Hole | ||
Package Type WOG | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 60A | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -55 °C | ||
Peak Forward Voltage 1.1V | ||
Peak Reverse Current 5µA | ||
Length 9.86mm | ||
Dimensions 9.86 x 8.84 x 5.6mm | ||
Width 8.84mm | ||
Height 5.6mm | ||
- COO (Country of Origin):
- CN
Bridge Rectifiers with Wire Leads, 2WxxG Series, Vishay Semiconductor
Low DC reverse current
High dielectric strength case
Wire Lead structure for Printed Circuit Board (PCB) through hole mounting
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.
Approvals
UL E54214
관련된 링크들
- Vishay Bridge Rectifier, 2A, 1000V, 4-Pin
- Vishay Bridge Rectifier, 1.5A, 1000V, 4-Pin
- Vishay Bridge Rectifier, 4A, 1000V, 4-Pin
- Vishay Bridge Rectifier, 15A, 1000V, 4-Pin
- Vishay Bridge Rectifier, 25A, 1000V, 4-Pin
- Vishay Bridge Rectifier, 6A, 1000V, 4-Pin
- Vishay Bridge Rectifier, 35A, 1000V, 4-Pin
- Vishay Bridge Rectifier, 1.2A, 600V, 4-Pin
