Phoenix Contact, AI0.75 -12 GY Insulated Bootlace Ferrule Kit, 12 mm Pin Length, 1.3 mm Pin Diameter, Grey 18 AWG Wire

Make your wired connections secure with this bootlace ferrule kit from Phoenix Contact. A tin-plated copper alloy contact delivers an effective electrical connection, ensuring your devices run efficiently. As the unit handles stranded conductors with cross-sectional areas up to 0.75mm², it's widely compatible with common equipment. Crimp termination achieves a tight bond to your cores, giving you reliable and airtight connections without the need for many tools.

• Outer diameter of 1.3mm for use in low-profile applications

Phoenix contact provides you with a range of great insulated ferrules that can be crimped onto the end of a cable or wire to give your connection more stability and prevention from fraying. These bootlace crimp ferrules are made from a soft tin-plated electrolytic copper and have a soft plastic cover to further enhance the connection and prevention of fraying. Designed with safety in mind, they're free from any silicone and halogen.

Ferrules are simple and easy to install. Firstly, they're mounted to the end of a stripped cable and are simply compressed onto the cable (typically with a tool) to form a tight and sturdy fit onto a cable. Once they're crimped onto the cable, give a gentle tug to ensure it is tight. Once you're sure it is tight, you can then proceed to mate your wire with connector.

Bootlace ferrules are used to help prevent the cable splicing or fraying when a connection is made. Typically the terminal blocks use a screw-connection, so if you have a bootlace ferrule mounted on your wire, this allows the screw to make a better bond rather than a few strands of metal cable. Not to mention, installing a bootlace ferrule ensures your connection is easier to install and remove.