제조사부품번호

Microchip RN42-I/RM630 Bluetooth Chip 2.1

RS 제품 번호:: 123-8533
제조사 부품 번호:: RN42-I/RM630
제조업체:: Microchip

Microchip RN42-I/RM630 Bluetooth Chip 2.1

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩40,645.60

마지막 RS 재고

최종적인 12 개 unit(s)이 배송 준비 됨

수량	한팩당
1 - 4	₩40,645.60
5 - 9	₩39,837.20
10 +	₩39,028.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 123-8533
제조사 부품 번호:: RN42-I/RM630
제조업체:: Microchip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Microchip
	Product Type	Bluetooth Chip
	Bluetooth Class	Class 2
	Bluetooth Version	2.1
	Data Rate	3Mbps
	Receiver Sensitivity	-80dBm
	Frequency	2.48GHz
	Interface Type	USB, SPI, UART, PCM, GPIO
	Minimum Supply Voltage	3V
	Maximum Supply Voltage	3.6V
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Standards/Approvals	No
	Series	RN42
	Length	13.4mm
	Width	25.8 mm
	Height	2.4mm

	모두 선택
	브랜드 Microchip
	Product Type Bluetooth Chip
	Bluetooth Class Class 2
	Bluetooth Version 2.1
	Data Rate 3Mbps
	Receiver Sensitivity -80dBm
	Frequency 2.48GHz
	Interface Type USB, SPI, UART, PCM, GPIO
	Minimum Supply Voltage 3V
	Maximum Supply Voltage 3.6V
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Standards/Approvals No
	Series RN42
	Length 13.4mm
	Width 25.8 mm
	Height 2.4mm

Datasheet

RN-42 Bluetooth 2.1 + EDR Class 2 Module, SPP profile

The Microchip RN42 Class 2 Bluetooth Module is a small form factor, low power and simple to integrate solution for adding Bluetooth communications into designs. The RN42 is fully certified, supports multiple interface protocols and features low power consumption making it an ideal embedded solution.

Features

Fully qualified Bluetooth version 2.1 module; supports version 2.1 + Enhanced Data Rate (EDR)

Backwards-compatible with Bluetooth 2.0, 1.2 and 1.1

ASCII command interface over UART

Low-power Consumption: 26 μA sleep, 3 mA connected, 30 mA transmit

Small form factor

UART (SPP or HCI) and USB (HCI only) data connection interfaces

Embedded Bluetooth stack profiles include GAP, SDP, RFCOMM, L2CAP protocols, with SPP, HID and DUN profile support

Bluetooth SIG qualified

Castellated SMT pads for PCB mounting (RN42 / RN42N) or 2 x 10 socket compatible pins (RN42XV)

Class 2 power amplifier

PCB antenna (RN42 / RN42XVP), No antenna (RN42N), U.FL antenna socket (RN42XVU)

AES-128 encryption

Compatible with Microchip Microcontroller Families (PIC16F, PIC18F, PIC24F/H, dsPIC33 and PIC32)

Performance

RF Frequency Range: 2.402 GHz to 2.480 GHz with 79 channels

RF Output Power: +4 dBm

Receiver Sensitivity: -80 dBm

Range up to 10 metres

Sustained SPP data rates: 240 Kbps (Slave mode), 300 Kbps (Master mode)

HCI data rates: 1.5 Mbps sustained, 3.0 Mbps burst in HCI mode

Host communication: serial UART with RTS/CTS flow control

Power supply: +3.0 V to +3.6 V dc

Bluetooth - Microchip

Approvals

Bluetooth, FCC, IC, CE