Tektronix Digital Bench Power Supply 150W, 1 Output 0 → 60V 2.5A

  • RS 제품 번호 705-5026
  • 제조사 부품 번호 PWS4602
  • 제조업체 Tektronix
참조 문서
제정법과 컴플라이언스
제외
COO (Country of Origin): CN
제품 세부 사항

PWS4000 Series DC Bench Power Supplies Programmable

The PWS4000 Series of programmable DC bench power supplies incorporates wide voltage and current ranges, flexible features, excellent voltage and current accuracy, and remote sensing. Numeric keys and a rotary knob enable direct entry of parameters or continuous adjustment. The four-parameter, bright vacuum fluorescent display shows meter readings and limits at a glance. Integrated setup memory and list functions help speed manual and remote control testing. Remote programming is through USB, and NI Signal Express PC software is included. A max voltage setting and password-protected front panel lockout help prevent circuit damage.

Low-noise linear regulation
Wide voltage and current ranges
0.03% basic voltage accuracy, 0.05% basic current accuracy
USB interface for remote programming
Bright display shows actual voltage, current and limits simultaneously
50 setup memories
Ripple and noise (7 MHz) 1mVrms / 3 → 5 mVp-p (depending on model)
List mode for test sequencing
Remote sense, rear outputs and trigger/status lines
Constant voltage, constant current control modes

Note

GBIP adapter 113-143 (TEK-USB-488) can be used for communication between USB and GPIB bus controller

Supplied with

Quick Start user manual, documentation CD, NI LabVIEW SignalExpress TE (Basic) Edition software, power cords, calibration certificates documenting traceability to National Metrology Institute(s)

Tektronix Power Supplies

사양
속성
Output Voltage 0 → 60V
Output Current 2.5A
Number of Outputs 1
Type Digital
Power Rating 150W
Supply Voltage 110 V ac, 220 V ac
Number of Displays 1
Input Connector IEC 320
Output Connector Binding Post Terminal
Minimum Temperature 0°C
Maximum Temperature +40°C
1 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
1,563,144.00
(exc. VAT)
수량
한(1)개당
1 +
₩1,563,144.00