Aim-TTi Digital Bench Power Supply, 1-Output 0 V ac to 35V, 175 W, 5 A Max

Subtotal (1 unit)*

₩878,475.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 8 개 단위 배송 준비 완료
  • 추가로 2026년 6월 05일 부터 7 개 단위 배송
  • 추가로 2026년 6월 19일 부터 13 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩878,475.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
665-4909
Distrelec 제품 번호:
169-85-121
제조사 부품 번호:
EX355R
제조업체:
Aim-TTi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Aim-TTi

Product Type

Bench Power Supply

Number of Outputs

1

Maximum Output Voltage

35V

Maximum Output Current

5A

Power

175W

Minimum Supply Voltage

230V ac

Plug Type

IEC 320

Output Type

Digital

Maximum Supply Voltage

230V ac

Digital/Analogue

Digital

Supported Number of Displays

2

Minimum Operating Temperature

5°C

Maximum Operating Temperature

40°C

Standards/Approvals

No

Minimum Output Voltage

0V ac

Minimum Output Current

5A

제외

EX-R Series Single, Dual and Triple Output PSUs


The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.

Mixed-mode regulated with linear final regulation

Constant voltage or constant current with automatic cross-over

4 digit meters with 10mV and 1mA resolution

Switchable remote sense terminals for perfect regulation at the load

DC output switch enables voltage/current setup without load connected

Safety terminals accept fixed shroud 4mm plugs plus forks and wires

Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)

EX Series: EX355P


Opto-isolated RS-232 interface

Front panel controls can be locked out

The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.

EX752M Digital Multi-mode Dual Output PSU


Separate voltage and current meters for each output

Safety output terminals

EX-R Series Dual and Triple Output PSUs EX354RD & EX354RT


Switchable remote sense terminals for perfect regulation at the load

EX354RT has auxiliary output of 1.5V to 5V at 5A

Approvals

EN61010-1 (Safety) and EN61326 (EMC)

Supplied with

user manual and mains lead

관련된 링크들