SKF TMMR 8F/SET Hand Bearing Puller, 23 → 350 mm capacity, 10 pieces

SKF Reversible Jaw Puller TMMR F Series

These SKF reversible jaw pullers are suitable for the internal and external pulling of bearings and other components, such as gears and pulleys. The eight pullers are of a standard range so are suitable for a wide range of bearing and component sizes. Unlike many similar pullers, the TMMR F series has a spindle tip cone which rotates helping to reduce shaft damage and enhance stability.

Features and Benefits

• Self locking arms for easy adjustment of width grip
• Hexagonal head on beam enables rotation of puller and bearing during dismounting
• Wide gripper range from 23 mm internal to 350 mm external
• Can be used to their full rated load capacity with no permanent deformation of the arms
• Arms and beam are chrome plated for corrosion resistance and easy cleaning

Application Information

Ideal for extracting gearwheels, ball bearings, pulleys and similar parts from shafts or axles.

SKF Hand Bearing Puller, 10 Pieces - TMMR 8F/SET

Do you need a jaw puller capable of handling a wide range of bearing sizes? This SKF hand bearing puller is the ideal tool for the job, with eight reversible pullers suitable for the internal and external extraction of bearings and components. Its self-locking arms make it easy to adjust the width of its large gripping range, while the rotating spindle-tip cone reduces the risk of shaft damage. There's also an option to test the puller's full load capacity without damaging its arms.

• Reversible jaw puller type
• 10-piece bearing puller set containing LGEV 2/0.035, TMMR 120F, TMMR 16/35 XL-5, TMMR 160F, TMMR 200F, TMMR 250F, TMMR 350F, TMMR 40F, TMMR 60F, TMMR 80F
• Capacity of 23 mm to 350 mm
• Chrome-plated arms and beam with good corrosion resistance
• Maximum withdrawal force of 40 kN
• Effective arm length of 98 mm

Application Information

• Automotive industries
• Food and beverage industries

What's the benefit of a reversible jaw puller?

A reversible jaw puller can grip on both the outside and inside of a component, offering enhanced stability and reducing the risk of damage to shafts when extracting bearings.