RS PRO Hand Bearing Puller, 50.0 mm Capacity, 2-Piece
- RS 제품 번호:
- 434-2566
- Distrelec 제품 번호:
- 304-14-340
- 제조업체:
- RS PRO
가격 개당**
₩110,466.72
82 <재고있음> 5-9영업일내 홍콩 발송*
* 배송 날짜는 선택한 수량과 배송 주소에 따라 달라질 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩110,466.72 |
**다른 단위에 대한 가격 표시
- RS 제품 번호:
- 434-2566
- Distrelec 제품 번호:
- 304-14-340
- 제조업체:
- RS PRO
제외
- COO (Country of Origin):
- TW
Long Arm Bearing Puller
These Bearing Pullers from our own RS PRO own brand are manufactured to a very high specification and subjected to rigorous testing which is exceeding their stated capacities.
The legs and beams are drop forged from high-quality steel and then heat-treated for extra strength and durability.
The legs and beams are drop forged from high-quality steel and then heat-treated for extra strength and durability.
What to consider when choosing a puller for your job?
Manufactured from alloy steel, drop forged and hardened
Designed for the easy removal of bearings, pulleys, sprockets etc
Max size of bearing/pulley etc. 50mm
Jaw length 300mm, maximum throat depth 220mm
Comes with short and long centre points
Fine thread for ease of use
Designed for the easy removal of bearings, pulleys, sprockets etc
Max size of bearing/pulley etc. 50mm
Jaw length 300mm, maximum throat depth 220mm
Comes with short and long centre points
Fine thread for ease of use
Spread of bearing puller? It is determined by the width of the part to be pulled.
Reach of bearing puller? It must be at least equal to or larger than the depth of the part that you need to remove.
Force of bearing puller? If you removing rusted parts or where there is a large area of surface contact, a greater force will be required. Consider choosing a puller which force screw diameter is at least half the size of the shaft on the item that you need to remove. Still not sure which puller to choose? Use the next largest simply because undersized bearing puller will slow down the job and nobody has time for that.
Reach of bearing puller? It must be at least equal to or larger than the depth of the part that you need to remove.
Force of bearing puller? If you removing rusted parts or where there is a large area of surface contact, a greater force will be required. Consider choosing a puller which force screw diameter is at least half the size of the shaft on the item that you need to remove. Still not sure which puller to choose? Use the next largest simply because undersized bearing puller will slow down the job and nobody has time for that.
Features and Benefits
• 2 vanadium jaws for removing small bearings, gears, taps and bushes
• Maximum size of bearing - 50mm
• Arm spread - 10 to 50mm
• Reach - 230mm
• Self-centring force
• Drop forged legs with independent leaf springs
• Prevent damage to the shaft being pulled
• Work efficiency and time-saving effort
• Fine thread for easy use
• Maximum size of bearing - 50mm
• Arm spread - 10 to 50mm
• Reach - 230mm
• Self-centring force
• Drop forged legs with independent leaf springs
• Prevent damage to the shaft being pulled
• Work efficiency and time-saving effort
• Fine thread for easy use
Where will you need this bearing puller?
Automotive and engineering applications such as:
• Alternators
• Generators
• Domestic appliances
• Power tools and pumps
• Alternators
• Generators
• Domestic appliances
• Power tools and pumps
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
속성 | 값 |
|---|---|
| Capacity | 50 mm |
| Puller Type | Bearing Puller |
| Operation | Hand |
| Number of Pieces | 2 |