대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩37,976.00
재고있음
- 47 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 5 | ₩37,976.00 |
| 6 - 11 | ₩36,453.20 |
| 12 + | ₩34,930.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 339-8912
- 제조사 부품 번호:
- YAR 205-2F
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Ball Bearing Insert | |
| Inside Diameter | 25 mm | |
| Outside Diameter | 52 mm | |
| Material | Pressed Steel | |
| Static Load Rating | 7.8kN | |
| Locking Type | Set Screw | |
| Dynamic Load Rating | 14kN | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Series | YAR | |
| Overall Width | 34.1mm | |
| Limiting Speed | 7000rpm | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Ball Bearing Insert | ||
Inside Diameter 25 mm | ||
Outside Diameter 52 mm | ||
Material Pressed Steel | ||
Static Load Rating 7.8kN | ||
Locking Type Set Screw | ||
Dynamic Load Rating 14kN | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Series YAR | ||
Overall Width 34.1mm | ||
Limiting Speed 7000rpm | ||
제외
SKF Ball Bearing Insert, 25 mm ID - YAR 205-2F
Use this ball bearing insert from SKF to support radial and axial loads when they're on a moving shaft. Installation is straightforward – simply attach the insert to the shaft using a set-screw lock. This highly versatile component can be used with SKF self-lubricating sealed bearing units or your own existing housings. The bearing insert is useful for anything from gym equipment to printing systems and food-processing equipment.
• Pressed steel material for high strength and durability
• Centre height of 28.3 mm
• Depth of 32 mm
• Inside diameter of 25 mm
• Length of 108 mm
• Mount hole centre-to-centre distance of 86 mm
• Mount hole size of 10 mm
• Overall height of 56 mm
• Dynamic load rating of 10.8 kN
• Static load rating of 7.8 kN
Application Information
• Manufacturing
• Textiles
• Agriculture and food production
What happens if my axial load exceeds the limiting value?
If you need to go over the maximum axial load, you should place a shoulder on the shaft. The bearing ring will brace against this shoulder, preventing the extra load from affecting the set-screw lock and potentially damaging your equipment.
관련된 링크들
- SKF Ball Bearing Insert 25.4 mm ID 52 mm OD YAR 205-100-2F
- SKF Bearing Unit Insert 25 mm ID 52 mm OD YAR 205-2RF
- SKF Bearing Insert 22.225 mm ID 52 mm OD YAR 205-014-2F
- SKF Bearing Insert 23.813 mm ID 52 mm OD YAR 205-015-2F
- SKF Bearing Unit Insert 25 mm ID 52 mm OD YAR 205-2RF/HV
- SKF Bearing Unit Insert 25 mm ID 52 mm OD YAR 205-2LPW/SS
- SKF Bearing Insert 25 mm ID 52 mm OD YET 205
- SKF Bearing Unit Insert 25 mm ID 52 mm OD YAT 205