Subtotal (1 unit)*
₩251,412.40
재고있음
- 추가로 2026년 3월 30일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩251,412.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 233-7270
- 제조사 부품 번호:
- YAR 214-2F
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Product Type | Bearing Unit Insert | |
| Material | Stainless Steel | |
| Static Load Rating | 45kN | |
| Dynamic Load Rating | 62.4kN | |
| Series | YAR 214-2F | |
| Overall Width | 69.9mm | |
| Standards/Approvals | No | |
| Limiting Speed | 2800rpm | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Product Type Bearing Unit Insert | ||
Material Stainless Steel | ||
Static Load Rating 45kN | ||
Dynamic Load Rating 62.4kN | ||
Series YAR 214-2F | ||
Overall Width 69.9mm | ||
Standards/Approvals No | ||
Limiting Speed 2800rpm | ||
- COO (Country of Origin):
- IT
SKF Bearing Unit Insert, 70mm Inside Diameter, 62.4kN Dynamic Load Rating - YAR 214-2F
This bearing unit insert is designed to support rotating shafts within mounted housings in industrial systems. It provides radial load support for driven components and is intended for integration where a cylindrical bore fit and screw-based locking are required. The insert is suited to machinery and equipment in automation, electrical and mechanical environments where dependable shaft alignment and straightforward replacement are needed.
Features & Benefits
• Cylindrical bore delivers secure concentric shaft support
• Screw locking type enables quick, tool-based retention
• Steel construction offers robust material strength for assemblies
• Limiting speed of 2800 r/min accommodates moderate-speed drives
• Screw locking type enables quick, tool-based retention
• Steel construction offers robust material strength for assemblies
• Limiting speed of 2800 r/min accommodates moderate-speed drives
Applications
• Suitable for conveyor drive shaft support in automation systems
• Ideal for motor and gearbox mounting in electrical drives
• Used with precision rollers in electronics assembly lines
• Can be used for pivot supports in mechanical handling equipment
• Ideal for motor and gearbox mounting in electrical drives
• Used with precision rollers in electronics assembly lines
• Can be used for pivot supports in mechanical handling equipment
What bore size should the shaft be for correct fit?
Use a 70mm shaft diameter where a cylindrical bore match is required for proper seating and load transfer.
What outside dimension is needed in the housing pocket?
The component has an outside diameter of 125mm, which determines the housing recess requirement for a secure fit.
How much axial or radial load can it tolerate without movement?
It withstands static loads up to 45 kN at standstill conditions and dynamic loads up to 62.4 kN during rotation.
What is the overall thickness to consider for axial space planning?
The unit requires 69.9mm of axial clearance for proper installation and accommodation within a housing.
관련된 링크들
- SKF Bearing Unit Insert 31.75 mm ID 72 mm OD YAR 207-104-2F
- SKF Bearing Unit Insert 25 mm ID 52 mm OD YAR 205-2RF
- SKF Bearing Unit Insert 20 mm ID 47 mm OD YAR 204-2RF
- SKF Bearing Unit Insert 55 mm ID 100 mm OD YAR 211-2F
- SKF Bearing Unit Insert 40 mm ID 80 mm OD YAR 208-2RF
- SKF Bearing Unit Insert 45 mm ID 85 mm OD YAR 209-2F
- SKF Bearing Unit Insert 50 mm ID 90 mm OD YAR 210-2RF
- SKF Bearing Unit Insert 65 mm ID 120 mm OD YAR 213-2F