Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported

Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly

Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction

Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks

Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present

The outer ring of the bearings is to be located by means of easy-to-fit snap rings

Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques

Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported

Damping of running noise is required

수량	한팩당
1 - 4	₩324,610.20
5 - 9	₩311,615.64
10 +	₩305,135.28

모두 선택	제품 정보	값
	브랜드	INA
	Product Type	Bearing Insert
	Inside Diameter	50 mm
	Outside Diameter	90 mm
	Static Load Rating	35kN
	Dynamic Load Rating	23.1kN
	Overall Width	38mm
	Standards/Approvals	No
	Bore Type	Round
	Series	GSH

	모두 선택
	브랜드 INA
	Product Type Bearing Insert
	Inside Diameter 50 mm
	Outside Diameter 90 mm
	Static Load Rating 35kN
	Dynamic Load Rating 23.1kN
	Overall Width 38mm
	Standards/Approvals No
	Bore Type Round
	Series GSH

INA Bearing Insert 50 mm ID 90 mm OD GSH50-XL-2RSR-B

관련된 링크들