Better World
INA Bearing Insert 12 mm ID 40 mm OD GRAE12-XL-NPP-B
- RS 제품 번호:
- 194-6887
- 제조사 부품 번호:
- GRAE12-XL-NPP-B
- 제조업체:
- INA
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩45,942.00
일시적 품절
- 2026년 7월 02일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩45,942.00 |
| 13 - 24 | ₩44,109.00 |
| 25 + | ₩43,192.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
Better World
Our Better World range features products that make it easy for you to make a greener product choice you can trust. Click here to find out more.
- RS 제품 번호:
- 194-6887
- 제조사 부품 번호:
- GRAE12-XL-NPP-B
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Inside Diameter | 12mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 40mm | |
| Static Load Rating | 10.1kN | |
| Dynamic Load Rating | 4.75kN | |
| Bore Type | Round | |
| Overall Width | 28.6mm | |
| Series | GE | |
| Standards/Approvals | No | |
| Better World Product | Yes | |
| Better World Claim | Extended Product Life, Saves Energy | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Inside Diameter 12mm | ||
Product Type Bearing Insert | ||
Outside Diameter 40mm | ||
Static Load Rating 10.1kN | ||
Dynamic Load Rating 4.75kN | ||
Bore Type Round | ||
Overall Width 28.6mm | ||
Series GE | ||
Standards/Approvals No | ||
Better World Product Yes | ||
Better World Claim Extended Product Life, Saves Energy | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
관련된 링크들
- INA Bearing Insert 35 mm ID 72 mm OD GRAE35-XL-NPP-B
- INA Bearing Insert 17 mm ID 40 mm OD GRAE17-XL-NPP-B
- INA Bearing Insert 40 mm ID 80 mm OD GRAE40-XL-NPP-B
- INA Bearing Insert 55 mm ID 100 mm OD GRAE55-XL-NPP-B
- INA Bearing Insert 50 mm ID 90 mm OD GRAE50-XL-NPP-B
- INA Bearing Insert 60 mm ID 110 mm OD GRAE60-XL-NPP-B
- INA Bearing Insert 45 mm ID 85 mm OD GRAE45-XL-NPP-B
- INA Bearing Insert 30 mm ID 62 mm OD GRAE30-XL-NPP-B