INA Bearing Insert 30 mm ID 55 mm OD RALE30-XL-NPP-FA106
- RS 제품 번호:
- 137-1534
- 제조사 부품 번호:
- RALE30-XL-NPP-FA106
- 제조업체:
- INA
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩53,768.00
일시적 품절
- 2026년 4월 14일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 12 | ₩53,768.00 |
| 13 - 24 | ₩51,624.80 |
| 25 + | ₩50,534.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 137-1534
- 제조사 부품 번호:
- RALE30-XL-NPP-FA106
- 제조업체:
- INA
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 30 mm | |
| Outside Diameter | 55 mm | |
| Static Load Rating | 8.3kN | |
| Dynamic Load Rating | 14.1kN | |
| End Type | Sealed | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| 모두 선택 | ||
|---|---|---|
브랜드 INA | ||
Product Type Bearing Insert | ||
Inside Diameter 30 mm | ||
Outside Diameter 55 mm | ||
Static Load Rating 8.3kN | ||
Dynamic Load Rating 14.1kN | ||
End Type Sealed | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Radial Insert Ball Bearings with Eccentric Locking Collar
INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation.;The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again.;The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded.;The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.
Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.;To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring.;In addition to bearings with a spherical outer ring (GRAE..-NPP-B and GE..-KRR-B), there are also cylindrical (RAE..-NPP and RALE..-NPP)
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise;• Protected against fretting corrosion;• Shaft diameters from 12 mm to 60 mm (RAE..NPP) and (GRAE..-NPP-B);• Shaft diameters from 20 mm to 30 mm (RALE..NPP);• Shaft diameters from 17 mm to 120 mm (GE..-KRR-B)
Suffixes
FA106 - Bearing subjected to special noise testing;B - Bearing with special outer ring;NPP - Lip seals on both sides (P type seal);KRR - Lip seals on both sides (R type seal)
INA
관련된 링크들
- INA Bearing Insert 20 mm ID 42 mm OD RALE20-XL-NPP-FA106
- INA Bearing Insert 30 mm ID 62 mm OD RAE30-XL-NPP-FA106
- INA Bearing Insert 25 mm ID 47 mm OD RALE25-XL-NPP
- INA Bearing Insert 25 mm ID 52 mm OD RAE25-XL-NPP-FA106
- INA Bearing Insert 19.05 mm ID 42 mm OD RAL012-NPP-FA106
- INA Bearing Insert 50 mm ID 90 mm OD RAE50-XL-NPP-FA106
- INA Bearing Insert 40 mm ID 80 mm OD RAE40-XL-NPP-FA106
- INA Bearing Unit Insert 17 mm ID 40 mm OD RAE17-XL-NPP-FA106