Moflash LED195 Series Red Flashing Beacon 48V, LED Bulb Rear, Side, IP65

모든 Beacons 열람하기

Subtotal (1 unit)*

₩134,119.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 10 개 단위 배송 준비 완료
  • 추가로 2026년 4월 20일 부터 12 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩134,119.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
122-6675
제조사 부품 번호:
LED195-05WH-02
제조업체:
Moflash
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Moflash

Product Type

Beacon

Light Effect

Flashing

Lens Colour

Red

Housing Material

ABS

Bulb Type

LED

Current Consumption

35mA

Mount Type

Rear, Side

Current Type

AC/DC

Base Diameter

104mm

Housing Colour

White

Terminal Type

Terminal Block

Lamp Included

Yes

Maximum Supply Voltage

48V

Minimum Operating Temperature

-25°C

Series

LED195

Maximum Operating Temperature

55°C

Height

73mm

IP Rating

IP65

Standards/Approvals

CE Certified

COO (Country of Origin):
GB

Moflash Red Flashing LED Beacon, 370V DC, 280V AC - LED195 Series - LED195-05WH-02


Mount this flashing beacon from Moflash to a wall or flat surface for bright and reliable hazard signalling. It has an LED (light-emitting diode) lamp that produces a bright light that's visible in most lighting conditions. It's also a triple-mode beacon, so you can quickly and easily change light patterns with the jumper link on the printed circuit board (PCB). One mode has a flashing rate of 60FPM (flashes per minute), while another mode has a flashing rate of 120FPM for a more rapid and urgent signal. You can also set the light to a continuous static mode for steady illumination.

Features & Benefits


• Compact base diameter of 104mm to take up minimal space

• Wide operating temperature range of -25°C to +55°C for use in demanding environments

• 120° light output on a vertical axis for widespread visibility

Applications


• Laboratories

• Baggage claims

• Emergency vehicles

• Industrial automation

Is this beacon suitable for outdoor use?


Yes, this watertight beacon has an IP65 (ingress protection) rating, so it's built to withstand exposure to dust and low-pressure water jets. The O-ring slots around the base provide further protection against water.

Moflash Industrial LED Beacon - LED195 Series


Professional range of Moflash industrial LED beacons from the LED195 series. The LED beacons are designed for industrial or commercial applications where low maintenance, long life and cost effective solutions are required. The LED beacons have two stages of alarm. Flashing or continuous modes can be changed via a jumper link.

Continuously rated

LED long life

Low current consumption

Dustproof

Weatherproof

Cable termination inside the enclosure

Deep or Shallow base options

관련된 링크들