Kitronik Prototyping System For The BBC micro:bit
- RS 제품 번호:
- 204-8217
- 제조사 부품 번호:
- 5609
- 제조업체:
- Kitronik
Subtotal (1 unit)*
₩21,808.00
재고있음
- 17 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩21,808.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 204-8217
- 제조사 부품 번호:
- 5609
- 제조업체:
- Kitronik
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Kitronik | |
| Product Name | Kitronik Prototyping System For The BBC micro:bit | |
| Accessory Category | Prototyping | |
| 모두 선택 | ||
|---|---|---|
브랜드 Kitronik | ||
Product Name Kitronik Prototyping System For The BBC micro:bit | ||
Accessory Category Prototyping | ||
- COO (Country of Origin):
- GB
This Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder.
This prototyping system uses our specially designed Edge Connector Breakout Board for BBC micro:bit that gives full access to the pins on the bottom of the BBC micro:bit. The BBC micro:bit pins are broken out to a row of pin headers, the SCL and SDA pins are separated at the edge of the board providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.
This prototyping system is used in conjunction with a Small Prototype Breadboard. This makes it easy to connect additional components using the included jumper wires. No soldering required.
Please Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included.
This prototyping system uses our specially designed Edge Connector Breakout Board for BBC micro:bit that gives full access to the pins on the bottom of the BBC micro:bit. The BBC micro:bit pins are broken out to a row of pin headers, the SCL and SDA pins are separated at the edge of the board providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.
This prototyping system is used in conjunction with a Small Prototype Breadboard. This makes it easy to connect additional components using the included jumper wires. No soldering required.
Please Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included.