제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	RS PRO
	Valve Type	2-Way
	Product Type	Ball Valve
	Body Material	Nickel Plated Brass
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	170°C
	Handle Material	Steel
	Standards/Approvals	No

	모두 선택
	브랜드 RS PRO
	Valve Type 2-Way
	Product Type Ball Valve
	Body Material Nickel Plated Brass
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 170°C
	Handle Material Steel
	Standards/Approvals No

COO (Country of Origin):: IT

S.81 Side Drain Brass Ball Valve - 1/4 Turn

Application : Plumbing, Water

Drain the downstream or the whole line

Apply thermal or flow sensors

Apply pressure gauges

Divert the fluid to a new stream

Operating Temperature : -20ﾟC (-4ﾟF) / +170ﾟC (+350ﾟF)

Operating pressure : PN16 (230 PSI) up to 2’’, non-shock cold working pressure

Threads : ISO228 parallel female by female threads

Port : Full

Connections options : FxF

Stem Configuration : Blowout-proof nickel plated brass stem, with two FPM O-rings at the stem for maximum safety

Ball seats : Pure PTFE self-lubricating, with flexible-lip design

Body : Full port to DIN 3357 for maximum flow

100% Made in Italy

Chrome plated brass ball for longer life

Silicone-free lubricant on all seals

Travel stops on body to avoid stress at stem

24h 100% seal test guaranteed

Dual sealing system allows valve to be operated in either direction making installation easier

No metal-to-metal moving parts

No maintenance ever required

Handle clearly shows ball position

Quality : Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite or equivalent thread sealant; Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications

Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite or equivalent thread sealant

Finest brass according to EN 12165 and EN 12164 (formerly

DIN 17660 and UNI 5705-65) specifications

Double side drain allows easy and safe downstream line venting

Working Pressure:

16 Bar Kg/cm2 (230 PSI)

non-shock cold working pressure

Applicable to valve, not to side tap

Flow:

Full port to DIN 3357 for maximum flow

Thread:

ISO 228 parallel female by female threads

G 1/4in. ISO 228 drain on both side

Seals:

Pure PTFE self-lubricating seats with flexible-lip design

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Note

Approvals apply to specific configurations only

Approvals

GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant

Warning

Freezing of the fluid in the installation may severely damage the valve

RS PRO Nickel Plated Brass 2-Way, Ball Valve

S.81 Side Drain Brass Ball Valve - 1/4 Turn

Ball Valve, Standard, Padlockable and Panel Mount

Note

Approvals

Warning

관련된 링크들