RS PRO Stainless Steel Threaded 2-Way 1000 psi, Ball Valve

Ball valves can be used for air, gases, water, steam, chemicals, petrochemical products, etc. These valves are simple to use, you move the handle by a quarter of a turn to open or close the valve. Stainless steel ball valves are used due to the materials resistance to corrosion and are often found in aggressive environments.

RS PRO have a great range of 2-piece stainless steel ball valves for the control of flow which can handle various pressures and high temperatures. 2-piece valves can be disassembled making them easier to clean and inspect.

RS Stainless Steel Screwed End Ball Valves for the control of flow. Available in a variety of sizes:

764-4256 - 1/4 inch Ball Valve BSPP F-F

764-4250 - 1/2 inch Ball Valve BSPP F-F

764-4269 - 3/4 inch Ball Valve BSPP F-F

764-4262 - 1 inch Ball Valve BSPP F-F

764-4275 - 1-1/2 inch Ball Valve BSPP F-F

764-4278 - 2 inch ball Valve BSPP F-F

Stainless steel - superior corrosion resistance, ideal for demanding applications with high temperatures

Suited to higher pressure and temperature applications

Full port 1/4 inch to 3 inches (DN8 - DN80)

W.P: 1000 WOG (Water. Oil, Gas rating for the valve) (PN63)

W.T: -20°C to 200°C

Investment casting

Blow-out proof stem - protects the operator

Locking device

Tapped and drilled mounting pad (option)

TA-Luft approved (option)

Length conform to DIN 3202/4-M3-2006SM3 (option)

Thread type: ASME B1.20.1 (NPT) DIN2999 and BS21 ISO7/1 and EN10226

Ball - ASTM A351-CF8M

Stem - ASTM A276-316

Gland - AISI 304

Seat - PTFE/RTFE

Seal, Packing & Thrust Washer - PTFE

Spring Washer & Nut - AISI 304

Handle & Locking Device - Stainless Steel

Handle Sleeve - PVC

Applications include:

Heating systems

Water treatment

Gas flow control

Liquid flow control

A ball valve is a type of shut off valve that controls the flow of liquids or gases by its rotary ball. The valve is open when the ball’s hole is in line with the flow and closed when the ball is rotated by a quarter turn (90 degrees) by the valve handle.

A full-bore ball valve (also known as full port) has an oversized ball so that the hole in the ball is the same size as the pipeline resulting in lover friction loss. In other words, the bore diameter has the same internal diameter as the pipe. A reduced bore valve has a smaller bore diameter than the internal diameter of the pipework it is on.