SKF E2.6305-2Z/C3 1 Row Deep Groove Ball Bearing - 25 mm ID, 62 mm OD

This deep-groove ball bearing is a sealed, single-row solution for rotary support in electrical and mechanical systems. It is designed to accommodate radial loads and moderate axial forces while maintaining smooth rotation at high speeds. The bearing is suited to precision-driven assemblies where controlled internal clearance and a shielded end configuration are required.

• Shielded ends reduce contamination ingress during operation
• Non-metallic cage lowers friction and supports quieter running
• C3 internal clearance compensates for thermal expansion at speed
• Dynamic load capacity 22.9 kN supports sustained radial loading
• Static load capacity 11.6 kN resists deformation under static loads
• Limiting speed 15,000 r/min enables high-speed rotating equipment

• Suitable for sealed bearing requirements in electric motors
• Ideal for high-speed spindles in automation equipment
• Used with precision fans and blowers in electronics cooling
• Can be used for rotary shafts in small gearboxes
• Suitable for electromechanical actuators and drives

The bearing uses steel balls to deliver wear resistance and consistent contact geometry.

It has a cylindrical bore suited to plain shaft fits and standard press or slip-fit installation.

A non-metallic cage is used to reduce internal friction and lower operational noise.

The single-row deep-groove design allows limited axial load support in both directions while primarily carrying radial loads.